logs

Hello. I recently got vagcom and have been doing a few logs. I'm new to this but from what I can see the lambda value doesn't look right. It's just stuck on -1.6 for some of the runs but fluctuates on others. The intake air temp is high on one of them because the car was on idle for...

Hi Guys, I've recently picked up a Bora 1.8T Sport with full Milltek (downpipe and cat recently replaced under warranty), Carbonio and APR Stage 2 software. It has the AUM engine which as you will know is exactly the same as the AUQ apart from the factory ECU mapping. Same turbo, DBW, VVT...

Group A: '003 Group B: '115 RPM Mass Flow Load Ign. Timing RPM Load Absolute Pres. Absolute Pres. TIME TIME MARKER STAMP /min g/s % ° STAMP /min % mbar mbar 0 2160 17.11 12.5 33.8 0.44 2240 93.2 1970 1170 0.94 2400 57.86 100 7.5 1.34 2520 130.1 2010 1670 1.75 2680...

the other halfs golf is running rough ans smells of fuel, ive logged 2 codes and done a search, most people say maf but thats not that old, its a 1.8 gti Turbo. any help?? codes are 16487 and 17545, cheers

Hello, I have never really logged my fuelling much but as im tweaking my setup with unisettings I thought I would take some logs of block 031. My voltages are all over the place to start with - on idle i see .750, then all of a sudden 0.040 volts and it keeps fluctuating between 0.04 - 0.80...

Hi all, Recently I have noticed my boost is only reaching 14 psi and then tailing off a couple of psi. Previously it would spike to around 21-22 and hold around 15psi. (boost guage) There is no obvious boost leaks or split vac lines, and i have recently serviced th DV. Also there is an...

Hi all, Recently I have noticed my boost is only reaching 14 psi and then tailing off a couple of psi. Previously it would spike to around 21-22 and hold around 15psi. (boost guage) There is no obvious boost leaks or split vac lines, and i have recently serviced th DV. Also there is an...

Group A: '118 Group B: '032 RPM Temperature Load Absolute Pres. Lambda Lambda Bin. Bits TIME TIME Marker STAMP /min °C % mbar STAMP % % 0.84 1840 2 95.3 1310 0.44 -0.8 -9.4 1.64 2120 1 99.2 1530 1.24 -0.8 -9.4 2.44 2400 0 99.2 1810 2.04 -0.8 -9.4...

hey there this is som logs on my passat 1.8t hade a test run today but aint as fast as the cupra:D Group B: '115 Group C: '118 Engine Load Inj. On Time Air Mass In Engine Speed Engine Load Spec. Boost Actual Boost Engine Speed Air Temp In Boost Duty Actual Boost...

Can someone please look at my log of block 118 and comment if my N75 cycle looks normal? 4th gear run 1920 rpm to red line. Thanks Group A: 118 Engine Speed Intake Air Wastegate (N75) Boost Pressure TIME Temperature Duty Cycle (actual) Marker STAMP /min °C % mbar 0 1920 15 0...

hi, im looking to get a better induction kit on my LCR, at the moment it is the jabba vs neuspeed p flo.........i know this may of been covered but has anyone actually done any airflow logs to prove which will be better? many thanks

Hello guys :) I went out with jamiebennett to do some logging tonight as my car doesn't feel as fast as it was before FMIC. You can check the logs here. http://www.seatcupra.net/forums/showpost.php?p=2811089&postcount=60 Everything point to boost leak right? Is everything else...

thought i might post my latests logs.Had a few problems over a period of time but think they're behind me now.Pretty sure these show a healthy LCR , Sunday 14 February 2010 19:19:37 Monday 1ML 906 032 1.8l R4/5VT 0001 1ML 906 033 Group A: '003 Group B...

Did some logs the other day as i had a maf error code and got a new air filter, but the error code hasnt come back. Logs done from 3rd to 5th 31 January 2010 17:53:13 1ML 906 032 1.8l R4/5VT 0001 Group A: '002 Group B: '020...

i have a problem car was running very well stage 1 map fmic tip open cone filter oo7p and boost hoses running around 215 gs of air and loading was 191.7 throughout the rev range now i took the boost hoses of and put standard 1s back on still have tip etc changed my cone filter and the problem...

could anyone please post a guide/parts needed and links for a custom/ebay fmic install on a leon cupra please id like to see a individual thread on this, either twin pass or single pass and costs and how to fit etc big ask i know but theres tons on lcr single pass love to see how youve...

Hello All, I need help, I have a MY05 LCR, with the mods listed in my sig below, anytime I do logging I always see lots of CF’s, I have read a bit about them and basically they are correction factors and caused by the ECU retarded the timing for a few different reasons? that’s great, but I...

Guys, Just some logs that I would appreciate some feedback on. Recently installed a Forge FMIC and want to check that everything is working as it should. Spec of the car is in my signature. I've also degauzed the MAF. Group A: '003 Group B: '020 RPM Mass Flow Load Ign. Timing...

Pictures shamelessly borrowed from Markojay, thanks. I really like the Jabbasport heatshields and one would be perfect for my setup but I cant help thinking that it would be very similar to having a standard airbox if it goes upto the bonnet like this one appears to. This would surely...

Group A: '003 Group B: '115 Group C: '020 Engine Speed Intake Air Mass Throttle Drive Ignition Engine Speed Engine Load Charge Pressure Charge Pressure Cylinder 1 Ignition Cylinder 2 Ignition Cylinder 3 Ignition Cylinder 4 Ignition TIME Angle Sensor 1 Timing Angle TIME...