kandn

hiu im looking to put an induction kit on my 1.8 20vt ibiza FR but dont wanna put a pannel filter on id rather a viperkit with cold air feed and its all boxed in so suffering from heat soak shouldn't be too much of a problem its just that if you look down the K&N or pipercross list they dont...

Guys, Is this anygood and worth it?? I ve got a SLC 180, wondering if this would make any differnce?? What benfits are there from getting this, performance?? Just curious. 125BHP K&N 57i INDUCTION KIT

Has anyone tried out the new K&N induction kit of the LCR. Its their apollo 57A-6015. I've just ordered one should arrive anytime soon. They state that it will give you an extra 20bhp! Any thoughts or reports??

K&N don't list a 57i kit for the 2.0 16v Cordoba. However, they list one for the Ibiza 2.0 16v (57-0254) - can I safely assume that this will fit and that there are no silly subtle differences between the Ibiza and Cordoba in this area?

I have been offered a K&N air filter (;) ;) ) ,but is it worthwhile fitting it too my 1.6s?.I drive a standard Leon and i am not looking to soup it up in any way but i have been told K&N filters can increase the 2 bhp (wow) which am not bothered about but what i have been told is that it...

What be the best block to measure on a TDI 150 engine to determine if the K&N filter is better than the standard paper element? My mate has a Golf TDI 150 and we want to log it with standard filter and then put my K&N in and log it again to see if the car does gain anything, or even loose...

Have any of you fitted a K&N panel filter to your FR TSFI's? Or another make for that matter. Did you notice any change? I fitted one to my old 172cup and the misses MX-5 and it smoothed out the engine noticibly, bit more sound and maybe a bit faster.... definitely worth it. Don't...

1. Tap the filter to dislodge any large embedded dirt, then gently brush with a soft bristled brush. 2. Spray the filter with K&N cleaning fluid and leave on for 10 minutes 3. Rinse off the cleaning fluid with low pressure water, going from the inside out. 4. Shake off excess...

Postman delivered this today thanks to Awesome. fitting was a doddle 5mins, remove the 6 screws holding the airbox lid then remove the 2 screws holding the air intake assembly(tube on the top left of the pic) once open side by side new and old filter, very thick for the OEM filter...

Seems K&N are very keen to put this issue to bed. They've apparently even gone to the trouble of conducting tests that they claim prove their side of the story. See here: http://www.knfilters.com/MAF/massair.htm Appologies if this has been posted before. Cuprablue

Sorry if this has already been talked about but im rather new to this kind of thing and its my first post. I’m looking to upgrade my standard air filter from the bog standard to a better performance filter, not really interested in full induction kits. These two names seem to come up...

Whats peoples thoughts on the new K&N induction kit for the Cupra R? Am I just being a cheap scape or are they any good? I know the Carbonio is well recommended on here but their site says that they do not do one for the Cupra R??? Advise required please people!!! :think:

I decided to go for K&N induction kit, I dot care much about the horse power issues. It shall give the care a better breath and sound. Only one question. regarding the water issues (when washing, doing into a pudle of water and mud, etc). Any serious effects? Expereinces plzz

Hi guys, just did the major service on my new purchase cupra 2.0l GTi16v... now looking for the K&N panel filter, can someone please confirm the part no.? is it 33-2069? or 33-2839 or 33-2649? and any one know if the TT pedal set fit straight to the car without modification...

which filter to go for? i want to be able to hear my forge 007 but since ther both open filters, i dont supose ther will be much difference?

Hello to all. Can anyone give me their views on each manufacturer as i do not know a dam thing really about either! lol I got a 1.2S Mk4 and these are the 2 companies that i can find which do products for my car. Just wondering which (if any) makes the better induction kits? Heard a few things...

I want to have a look at a car at the weekend which is standard bar a K&N filter. I have done some searching and seen that these tend to break the MAF. I have 2 questions: 1) Is it likely to affect anything else and damage the rest of the engine? 2) How easy is it to put the standard...

thinking of gettin one of these..will it improve performance and sound better?

hi Guys, Just installed my K&N kit - sounds pukka. One question for anyone who has got one in their 2.0l 16v ABF:- There is a heat pipe from the exhaust manifold (back of engine) which attaches to the bottom of the original air box - where does this pipe go on the induction kit?? i have...