hybrid

Hey guys. Had a hybrid turbo fitted to my PD130 Ibiza yesterday. The best of both graphs makes 230bhp and 330ft/lb of torque. Which I've been told by several people, the torque is WAY down on what it should be? But tonight I have had problems. I took the advise of the people that did the...

I wasn't really sure of the best place to post this but can anyone confirm that the injectors in the picture below are actually BAM injectors? They were supplied as 06A 906 031 BC (apparently off a LCR) but there isnt any part number on them. I thought they would atleast have Bosch stamped on...

I am going to need some new brakes soon. But I am going KO3 hyrbrid in the future. Would EBC turbo groove discs all round with green stuff pads be ok with that setup? Only problem is there standard size, 280mm...

right im trying to weigh up the differences. all i need now are: ko3s route ko3s, tip, map, 4bfpr or ko3 hybrid ko3hybrid, tip, 3'' maf, 4bfpr, injectors and map is it worth the extra wait and extra cash to go for the ihi, also will i need to change my clutch etc... will it be v noticable...

Dropped my Cupra tdi in at P-torque yesterday for the hybrid treatment, cant wait to get it back. The car was good as it was with tunit box and decat so i will be interested to know the before power run. The clutch was fine before the mods but started to slip with the box and decat so the...

as above searched but no luck. want abit more power than what iv got already, im running a ko4 set up with all the trimmings and 310 injectors. is it worth me goin k04 hybrid im at 271bhp now. or was thinking of doin a deal ofr the 342bhp ihi on piston heads. i know im looking at a...

http://66.102.9.102/translate_c?hl=en&sl=es&tl=en&u=http://motor.terra.es/novedades-coches/articulo/seat-presenta-coche-electrico-46264.htm&usg=ALkJrhjxyc6Opwk-lVq0Yg38VH3jRXqOjA

Hi There everyone At the minuet I have an Audi TT 180 bhp and never off the TTForum.co.uk (fh51hfo) and a TTOC member but always on here as there is a lot more talk about Big Turbo Kit and think us would be the best to get my help from, GruppeM induction kit Samco TIP Full magnex 225...

Im sending my 17vnt turbo to get hybrid'd over the next few months and was wondering, what a (130) 1749A vnt unit compared to a (150) 1749B is after hybrid'd is there any point in getting the 150 or would a 130 with the same work carried out make any difference?:shrug:

Im nearly there with my hybrid Gt2x hybrid build But every single person ive spoke to is sayin its a matter off time before my atp cracks... Well ive just checked it and theres a small crack in it so that only happend on my k03s stage 2.... Im looking around at the moment...And ive found...

I currently have a MD349 spec K03S with a K04 compressor wheel, modified turbine wheel and uprated 360 kit.Running at 1.2bar boost as TD warrenty it.Its rated to 250bhp which is max but dose anyone know what i can turn that up to? And wht figures i'd achive? I've spoken to td an they can put...

hey my names jason, bought my seat in july 08, insurance limited my choices so i went for the Leon because they are +modable compared to most hatches, im 19 and i live in Reigate and this is whats been done so far... Exterior .Debadged .Carbon S badge .Silvertec bulbs + diadem .Stumpy...

This is following on from another thread (link at the bottom) but could I get some opinions on the following logs. I've been told I should have at least 300bhp but the car doesn't seem much quicker than when I was on the standard turbo with APR stage 2 and the logs are showing a gain of around...

Firstly before i get ripped to streds by some of you i have done a search, found alot about the ko3s hybrid but nothing about the ko3. I want to know if you would get the same performance results by making a hybrid turbo out of a ko3 as you would with a ko3s, im assuming you would as they are...

Hi guys/gals need some honest advice on some work I've had done recently. Firstly a little background on the car, its an 04 LCR 225 (bam) with peloquin diff, neuspeed ARB's front and back, koni fsd's, eibach springs, 3" blueflame turbo back exhaust with decat and green panel filter. With...

Well first things first....its fitted :D But what i nightmare we've ( Jim and Me ) had, was easy to take the existing mani and turbo off, then came the annoying bit! :censored: should off put out a swear box! lol. first off we had grind the turbo housing as there was an extra fitting point...

Just thought i would put up some info on my car and some pics and try keep it updated when i do more things to see what you all think. Heres the car as it stands and what else i want to do. Engine: AM04 stage 2 turbo with Eurospec sports actuator Greentop 440cc injectors THS high flow...

Well my old backdraft kit is now removed and my new Jabba kit is being fitted Here are the pictures of my new Owen/Garrett hybrid turbo, Hoping for 440+ Running 2 bar of boost, Work has started

thought i better do ne of these i guess so here it is start to now..i want to say start to finish but ill never finish i had it remapped and then i decided it needed a body kit and wheels i also replaced the steering wheel and pedal covers to brighten up the interior

Hi, Well I have finally finished tuning/upgrading my car and now is the time to start saving money! lol :D Pictures below is from when i first bought the car up untill today (only thing missing is me new brakes which should arrive soon from badger5) I am finally happy with what i have...