forge

After having my Eliminator DV fitted for two years I decided to change the seals and service it. I contacted Forge about this to be told they didn't do seals for these anymore and don't make these any more. The guy said that instead of getting me seals (which they still have) they would send me...

Hi people When fitting my forge tip today, my mate told me that i have had my forge dv fitted the wrong way round. I had it fitted like no.1 ref image, but he recons it should be fitted like no.2, because the pressure is at the intercooler end and so needs to push against the piston in the...

hi, just purchased a forge splitter dump valve for my ibiza cupra (57 plate) not sure how to get the standard clips off the hoses and whether or not they can be re-used or do i need jubilee clips? i hear alot about the 007 dump valve but not so much about the splitter any1 have any feedback?

Just got my hands on an 03 plate Cupra 1.8T... 1 month in and I'm after my first mod - so getting straight to the point. I'm interest in finding out if people are happy with their Forge DV. I really fancy the Forge Splitter because once I get bored of the whoosh I can put the blanking...

I have had a Forge Split R fitted before and in reality i was losing power through it! my cars now running the standard plastic type again however im not happy with it, so the question is do i buy a forge 100% re-circ or the rather tasty looking APR from awesome gti? They are both around the...

Ok. Originally i had a 007p on the top of the TIP with the pipe running to the charge pipe. This was fitted with the base of the 007p into the TIP (Correct orientation). I then got a split-R, which sat in the same place, but fitted in the opposite orientation-base port was into the charge...

Just a little update, I fitted a forge split-r valve during the week and fitted my hid's yesterday and I must say it's £47 well spent. Had the plates on there a couple of weeks. Had some already without the euro logo on them until one decided to fall off so spent the extra pennies to get the...

fitted my green panel filter and split r today. was really surprised how easy it was. took 20 mins all in! thats good for me considering i'm a novice. was also pleased to find the once only clips came off without too much trouble too. turned split r turny bit fully anti clockwise to start...

Had been out shopping for the day yesterday, and was just approaching my home town. Came down off the nearby bypass and as I braked for the junction, I heard a scraping noise come from the front. I instantly thought; LCR Splitter is fooked and hanging off! So carried on and it did it a few more...

i've just recieved mine today in the post for the cupra, just a few questions. 1, does the front bumper really need to come off to fit it. 2, is it hard to fit and 3, roughly how long to fit. cheers, Rab

Hey guys fitted my tip pipe today and seemed to go fine till the end. basicly i was trying to fit the lowest hose into the tip where the metal join piece is and i strugled like hell and only managed to get it half on. anytips on this as its bugging me now?

Just fitted my forge TIP, had to cut abit off the turbo end so that i could slide it onto the turbo easier. Got it all fitted but Just looked and it is still hittting the metal water hoses on the right hand side, slightly squashing the pipe in. Is this how everyones is or does it need more trimming?

I know this has been asked many times, but i've spent hours looking through all the posts relating to it, and not come up with a clear cut answer. My cupra is currently running jabbasport stage 1, std turbo etc (think boost peaks at about 20psi, and drops to 12-13psi), altho i can't say i've...

I have done a search. But, worth the buy? Noticeable difference in torque?

Hello All I have just brought a LCR I am going to take it for a revo stage 1 remap they have offered me a 007P Forge recirculating valve at a 25% Discount and free fitting but will a gane anything from it. I have tried seaching but couldn't find anything on this.

Iam sorry if its been mentioned before (done a search and cant find anything about the Forge RS Valve).. any way ive been offered one for a good price, has anyone had/got any experience with one? Its came off a Golf and going on my LC. Thanks Here is a link...

Jeeeeesus! If I never see one of those O.E hose clips again i'll be a happy man. Is there a special tool out there that i could have used to take them off? My method of pulling them with pliers and levering them off with a screwdriver nearly made me resort to violence. So bloody...

anyone had the two top brackets on there front mount snap?? mine did lastnight in exactly the same place on both sides!!! it only grounded at the front a wee bit, im guessing the bumper came up and hit the bottom of the cooler!!! gona have to get them welded if they can be hopefully, any hints...

About 1 year ago I posted the question if it was possible to make the woosh noise from the wastegate on the LCR. Almost everyone said it is not possible. Looking at the Forge website today I noticed the below: Recirculation and Blow Off Valve...

Hi boys! i´m a newbye from spain. my car is a seat leon 150pd with little mdifications (r32 intake, decat pipe and a strong remap) ;). Looking at forge webpage, i've saw that the forge intercooler hoses kit to the 2.0 tfsi looks very similar to our OEM hoses (ARL engine). The link...