engine

Hi all, I was wondering if you could help. Ive recently bought a 2001 Leon Cupra, took it in for its Cam belt and prior to this it was running smoothly, no noise at all be it hot or cold. Went to collect it and has a HORRIBLE tapping noise!! They said it could of been because the previous...

Hello, (now before you say it, yes i have searched but do you know how many threads come up with the word engine in it!???) When i change gear usually lower gears, i get a clunk im thinking its an engine mount? opinions? are there any uprated engine mounts? Ive heard of vibratechincs...

hi all my 2l 8v seat ibiza dies when i take my foot off the accelarator pedal . this happens when i approah round abouts junctions and so on. but it will restart streigh away any ideas anyone thanks adam

I will be picking my Cupra on Monday,i am looking for any advice how to run-in the engine. Does it really have to be always within the speed limit and the first half of the rev range,gearbox with sport auto mode embargo,and for how many miles? And do i have to do an oil change after...

Hi, Sorry for lack of thorough searching, I just need a quick answer. Where do I find my engine code? Ben

hi just got a 52 ibiza 1.9tdi se when i put in to gear and pull away lots of movment on engine from back to front just wondering if any body as location of engine mounts or oic of engine bay cheers

hi guys found similar post related to my problem but not quite what im looking for!! recently got a mk2 gti 8v n realized whenever u start the car its really lumpy to start but then it idles fine. also realized when im driving in third gear around 1700 to 2300 revs it kangaroos a little...

guys, do you know if these are available from Seat or what the part no is? mine are battered. thanks

Hi guys I just wondering wheather anyone one else has had a simalar issue ? I own a mk2 Leon tfsi fr and last year had the following mods, ko4 turbo conversion s3 intercooler s3 injectors full tbe dogbone mount forge bov spacer eibach sportlines kmd hpfp internals front & rear...

EML is currently turned on because i dont have a resistor in the SAI sensor, Where is the best place to get a resistor from? its definatle 330ohm 10w isnt it?

I have a LCR 2004 and when i start up in cold i get a squeelin and rattling it does die down once warm but notice a rattling there especially when idle. I noticed when im runnin my heated rear screen or air con or somethin like that the noise is louder, as when sitting idle i put my window down...

hay guys, i got a 2.0t s3 265bhp engin off a mate, i have a tfsi fr 2.0t 200bhp leon. the plan is to make my 200bhp leon up to 265bhp by swaping over all the bits. the question is what bits do i swop? e.g turbo manifold Spark plug Valves Airflow meter Inlet manifold Clutch injectors...

Was just wondering if anyone has added one to their car, and if there was any such tutorials on how to fit one about? Think it would be quite a nice mod to fit to the car :p

Here goes I have a 2008 leon 1.6s when its cold its hard start some times when its starts the revs drop very low and once they pick the are still very jumpy i brought it to a seat dealer they put it on the computer and they say that it gave no faults??:confused: but they replaced the temp sender...

Hi all, I was driving my FR 150 home today cruising along when I heard a scrapping noice coming from the underneath. I stopped and saw the plastic cover had come loose and was rubbing off the road. When I got home I jacked it up to clip the cover back in place only to find the engine had moved...

Hey all, anyone know what the standard LC 180 bhp AUQ engine pushes out regarding torque levels? Cheers.

Started the car today and the yellow engine light on the dashboard appeared and has stayed on. The car felt all juttery and isn't running smoothly like usual any information on wot it could be would be really helpful Thanx

Has anyone done a guide or can give me tips on where to disconnect and remove to remove the engine, can it be removed from the top or bottom, how do you disconnect that electrical cylinder thing under the inlet mani etc etc, any guides or tips / with or without pictures would be appreciated, thanks

Hey all, I have noticed that on idle my engine looks very very wobbly in he engine bay Am thinking of just getting oem replacement as I don't like the idea of extra vibration in the cabin My question is does anyone know the names of the bits I would need to change, and how much...

-------------------------------------------------------------------------------- Hi lads, not long brought a 2002 Ibiza cupra. Had a few problems with it and ive only had it a day. complete nightmare. Can you tell me if an audi A3, Vw 1.8 20v turbo engine will fit straight in and replace...