calipers

Righto, i've got a set of Calipers to fit. They are just single pot and come with new hoses too. The whole brake systems fluid needs to be bled and changed (2 years since last done) and i'd rather pay the garage to do this with the annual service. My fluid reservoir is currently full...

do the tt calipers fit onto the 288mm carriers as my dads leon looks like the calipers are the same as the tt's but only has 288mm disks. i also know that mk4 owners only need the 312mm carriers to uprate the system to 312mm disks the reason is if i can souce some calipers and then change them...

i'm looking at a 312mm brake upgrade from a TT225. I've found some mostly unused calipers, pads and discs ie they were taken off the TT after not much use. The problem is they've then got wet. So all the parts are corroded. The guy says that the Piston and seals look OK but from the...

It's all going a bit Pete Tonge on the rear calipers for the Cordy :( After one of the calipers being "really" stiff to wind back in with only a pair of long nose pliers to hand I slipped and tore right through the rubber piston protector thing :cry: So it looks like I need to get my rear...

Ive seen it all now ! http://cgi.ebay.co.uk/BREMBO-AUD-VW-SEAT-FOURPOT-CALIPERS-MIRROR-POLISHED_W0QQitemZ190019264544QQihZ009QQcategoryZ10372QQtcZphotoQQcmdZViewItem

I noticed that the paint on my Cupra’s brake callipers is flaking off and so would like to re-paint them, as I don’t have the funds at the moment to go for the Brembo upgrade. I’ve never done it before and I’m sure its pretty easy but, what processes would I need to go through to make them...

well i duno about anywhere else but it was 34degrees in glasgow today and i was off work!! so instead of sitting about in the sunshine, i lay in the sunshine and did a bit of work on the car. its nothing fancy but it does look really good. gave my coilovers a bit of a clean as the grit from...

Spent last weekend on my hands and knees..... Painting my calipers: D Decided on blue for the colour, due to matching the car itself but also as it is a similar shade to the VW R32 caliper colour. Firstly I would say is prepare the calipers by buying a wire brush to shift the dirt and...

Hi, Just wanted some thoughts on my plan to paint my brake calipers yellow on my extreme blue cupra. Think this will look good. Was gonna do it myself, but i'm not too handy that way. Is it worth paying my local garage to do it do you think? Also, what is the best paint to use and...

Had wanted to do this for a while but hadn't got round to it untill today. Took the calipers off but painted the carrier while it was still attached to the car. Wasn't sure what colour to go for - was thinking silver or gloss black, went for bright red in the end up. I think it looks good...

My Audi is off having the first stage of some engine work done at the moment to boost the power a bit. The standard brake setup will not be strong enough and so will up grading. I have been looking around and basically its come down to a Hi Spec 6 pot 360mm or Tarox 10 pot 330mm conversion and...

at weekend fancy painting calipers but not sure what color would look good [B)] the car is artic grey so they call it but silver with standard rims and brakes, not sure how to do photo bucket thing yet but what you think these wheels would look like on it?? :confused: they are the kei pulse in...

Hi Everyone Brought my 2003 Cupra 210 on Sunday and all i can say is i wish i'd got one instead of my honda ctr a long while ago, you can't even compare them!! :D Any how, i seem to have slighty camp brake calipers, the two back ones are slightly pink! I've seen some brake caliper paint...

What a ******* though! I threaded the ******* locking wheel nut as some numpty did it up too tight, getting it off did this to my torque wrench And then i hammered my finger Had to resort to this to get the ******* off Finally all painted up

I have a question for u all , on my lcr the drivers side caliper has started to peel in places , it looks a mess , but the passenger side is fine not a single mark , I have spoke to 2 dealerships not mentioning names just yet , 1 couldnt even come out and take a look at the car and the other...

Mk 4 cupra AP calipers and what wheels fit them-info here -------------------------------------------------------------------------------- Can this be made sticky m0rk? if you could give your info and a pic i am sure there is a lot of cupra owners who would like to know what wheels...

Anyone else on here (besides Bill!) have problems with calipers discolouring and burning the shiny varnish finish off? My near side 1 has bubbled and flaked and tbh looks a right bloody state. Is it possible to get heat resistant laquer to get them redone? Haven't seen any around but that...

Found these on flea bay.RS6 8 piston calipers.Would they fit directly or at least be an easy brake caliper upgrade for a new Audi A3 2.0 TDI quattro ? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8030221463&fromMakeTrack=true

Hi all. Am I correct in assuming that the bolts holding the rear brake calipers on a 16V CupraSport are 2 x cap heads which require an 8mm Allen-key (and probably copious amounts of swearing) to remove? Much obliged. Mark

Does anyone know the part numbers of the brembo calipers to fit the mk3 cupra? Thanks :)