bolts

Hello, I ordered 10mm spacers for my 05 LCR on OEM alloys, i also ordered radius bolts for them and below is what i got, they look tapered to me, can any confirm this before i try to fit them? Thanks in advance

I've got a new exhaust to fit, full system from turbo back............got it out today to have a look and the down pipe comes with 4 new bolts? I thought the bolts from the turbo that hold the down pipe were fixed to the turbo? If not how do you get to the top of them and undo the nuts at...

I am looking at getting some 15mm spacers for the rear wheels of my k1, i have the black gloss alloys, do i need to get longer bolts in black to allow for the spacers if so where can i get black ones from? also any pics of leons with rear spacers would be good to see. thanks guys

I have just been down to B&Q to see if they have any M8x35mm hex head bolts, they only do 25mm or 50mm+ Would it cause a problem using bolts just over 20mm longer than standard? Thanks!

Hey didnt quite know how how to do the title but there is this thing i need to undo i have a T40 which is too loose and a T45 which is too big, now is there a special tool to undo this thing. Much words are needed. Wolfski

what is the fitting on a 1995 mk2 seat ibiza cls 1.4 cuz i REALLY cant get them out (well say them there is only one left) ne help would be very welcome cuz i need it done asap thanks ppl

Need to order some longer ones from awesome gti tomorrow. Took a pic of them but dont know which is which!

Did a search and couldnt find ecatly what im after. Basically, can some one confirm what wheel bolts i need for my wheels, running 17' OZ superleggeras, can anyone with the same wheels confirm what type of bolts they run, tapered or radius? I need to get some new ones, had to use 5mm spacers...

Apologies if this has already been covered, I'm just not typing in the correct thing to the search bar.. Just bought some OZ Superturismo 16" 4x100 (2nd hand) and I'm wondering whether I need to get new bolts for them.. (Guy down kwik fit speaks on the phone to me about needing the correct...

Im looking for stainless steel bolts for the wing bolts headlight and bolts that hold the front grill on, any suggestions or ideas would be hugely appreciated

Hi, Was out giving my car a check over and a wee tidy up and noticed how horrible the rusty bolts look on my nicely painted strut brace. Could anyone point me in the right direction where I would pick up some stainless steel ones. Bear in mind my local dealer is an hour away and I'm not...

Hi everyone, sorry if this is in the wrong section but just after your opinion really... Last night i was driving home and heard a tapping noise coming from my front nearside wheel, i pulled over and checked for stones in the tyre etc but found nothing. I got back in the car all seemed ok...

Hi everyone. I'm changing my 225/45/17 17" wheels to 225/40/18 18" this week.. But i got a question in my mind.. Do i need to change the bolts (lugs) ?Do i need to put longer ones ? Thanks for helps.

Having just changed the oil on the car, the bolts (those things with the star drive heads) the hold the sump guard up are looking quite rotten. Some have been replace by hex head bolts by my local garage when the car got a service. So i'm after a set of new star drive bolts and the metal...

what do you guys do for bolt locks when you use spacers? My original lock bolts are useless bcs they are not long enough when I have spacers on. options?

right doin me head in now think somebody has welded the two allen bolts on any ideas how to get them off without a grinder ?:lol:

Are the wheel bolts used for standard fit alloy wheels i.e Ronals, 26mm thread length?? Found these on ebay and I need 12 for my Oz Super T's. I know I need the radius head bolts. Also what radius is the seat on the bolt. Thanks.

Im after some M14x1.5 60oTaperd 40-43mm Locking wheels bolts. Anyone know where i can get some from, iv been looking all morning :( www.mcgard.com is the closest i can find but they only do Radius in the length i need. Thanks Nick

Hi, i got a nice suprise in the post two days ago... my forge fmic:) Took everything out and everything was there apart from the fitting guide. Did a search on here and found it.....no probs there. Took eveything else out and it doesnt seem to come with any replacement bolts or anything. Am i...

ok, they're not allen or torx, they are finer than torx, any ideas? i need to take the drive shaft out to undo the last bolt on my sump.