bolt

Ok i have been searching for the last 30 mins and cant find the info, i am putting a oil temp gauge on the car and as i have already used the hole under the inlet manifold for the pressure i want to use the sump plug type i have found one for fords/vauxhall's it says it is a M14 size will this...

Hi, Can anyone tell me the right torque setting for the oil drain Sump Bolt? I'm doing an oil change and want to be sure about the torque setting for this drain bolt. Thanks, G.

hey guys had a search on here for threads for mk 2 rolecgaers but havnt had any luck anyone have any idea where i can pick up anysort of full cage,preferably a botl in cage,or if need be a a welded one, many thanks :)

Hi, we're in the process of buying a 2.0TDi leon. For the winter we'd like to have the option of skinnier wheels if we get any snow. We've got a load of spare 5 bolt saab wheels with appropriate tyres and would like to know whether they'd fit. What's the BCD of the leon's wheels...

Not exactly MK4 specific but it is a bolt on 1 im after getting out. The hexi bolt in the door catch the top one has completely gone rounded. Just wondering what my options are realisticly, what comes 2 mind for me is: A)drill a pilot hole and use a screw extrcator B)use the dremel and cut a...

Hi, Put in the dynatwist on Saturday, but havent yet put in the supporting bracket as I couldn't find anywhere suitable to connect it to. There is a bolt hole by the passenger wheel arch, but it looks a too tight fit. Any ideas? what have other people done? it seems to be ok without the...

Can anyone plase provide a picture of their spare wheel well in a MK3 Cupra as mine appears to be missing a cap that screws onto the top of the threaded bolt going through the spare wheel? At the moment I have a bungee cord holding the jack over the wheel and it's rattling like buggery so I'm...

ive been told to buy these as the standard 1s keep blowing,any1 ideas as where to get them?

Wanna get 4 x new coil packs as one of mine has gone again and its being a pain, so thought i would change the lot for the newest version? R is it? Anyone got the part number? are they hitachi ones??? Want to get it from my VW dealer... rich

Just had to change a wheel - nice long screw right through the tyre (fortunatly not one of the new ones I just had fitted). However I'm not sure of the value the bolts should be torqued to - can anyone help? Car is Leon Mk1 110 TDi SE with 16" alloys. Mark

hey fellas, well im getting my first fulltime wage in at the end of the month so i was wondering if anyone could help answer the following: 1- does the K03s just straight swap for the K03? and be worth while? or will i need a manifold etc... 2- has anyone got one from a scrappies before and...

.....stupidly lost my locking wheel nut bolt while fitting the coil overs, cannot find it anywhere!! Im sure my 2001 Ibiza Cupra has the standard locking wheel nut bolts, i need the bolt which slides inside the locking wheel nut. Any ideas where i can buy one from? I've looked on EBay...

Going to be fitting my TIP at the weekend and was wondering if anybody knew the the size of the bolt that holds the OEM TIP on? Cheers

does anyone know the spec on the bolts used for 2-peice disks? high tensile? standard? thank you please HoocH

hi everyone just need to know where to get the allen key bolt that screws into the top of the turbo the one closest to the bulk head .Would i have to go to seat to get one or has someone got a spare one they will sell to me . thanks alot .

Hi Guys, I got myself a new set of alloys this week but the replacement wheel bolts I was sent are the wrong diameter i.e. too slim. Does anyone know what wheel bolt diameter is required for the LC (2001)? Also, what length should the bolts be? Cheers PS Done a thorough searchy and...

I did searched for "crownwheel bolt kit" to get some thread with a ref number for this kit without success. I'm fitting a quaiffe and the boys at the dealer never eard of this kit :cry: Does anybody has ETOS or that specific ref number ? Cheers.

Anyone ever had this happen? Half the bolt is stuck in the hub :doh: Whats the best way to get it out without damaging the threads?

hi guyz fited new front pads today & 1 of the bolts on calliper came off with the metal sleeve obviously ceased tried to undo holdind sleeve with pliers but no good ,for now i have just put it back in but where can i get ne wboly + sleeve? thanks

has any one drilled the pedal and bolted through instead of re-welding the pedal? reason i ask is i have no way of getting it welded back up... done a search seen one person done it which gave me the idea, couldnt find much else...