bolt

I am changing my brakes on the new LCR, just need to know what size torx key i need for the single bolt holding the disc on? can anyone help? Cheers craig

Hi guys, Trying to remove the Track rod ends on my mk3 cupra. They are inverted, and proving really difficult to remove. After using anti-seize and heat they still wouldnt turn, then the nut and bolt sheared off rather than turning, when applying force so now its still attached but the...

SWMBO's Leon had its clutch replaced on saturday, and while changing the release bearing, my mate noticed that there was a bolt sitting just behind the bearing itself that wasn't tightened up. He took it out tocheck the thread, etc. before replacing it and tightening it up correctly but today...

hi guys, anyone know the part number for the bolt that goes through the wheel bearing housing to hold the bottom of the strut into it? bolt and nut numbers if anyone knows..... cheers guys

I have been swapping my wheels about for the 1st time on my fr 130 and one of the bolts is badly threaded. The threads in the hole that the bolt goes into is also threaded. I have tried putting a new bolt into this hole but had no luck! Do i need to replace the full hub? or are there any other...

As Post title. I am in the process of fitting a strut brace on my mk4 Ibiza fr and one of the bolts started to come loose then just spines, seems to be the thread is ducked on the bolt. Anyone got any ideas on how to remove it?

Just looking in my haynes manual (for mk3 golf) to see whats involved with changing disks and pads. I noticed it says to release the calipers to change the pads you need to undo the guide pin bolt at the bottom of the caliper and then a new one must be used. Any ideas what this guide pin...

Does anyone know the part number for the wheel bolt covers that go over the Lock Bolts? I have lost 2 of them and they are different to the normal bolt covers as they are round not hexagonal. Cheers Rich

hi all I need to get a set of black wheel bolt covers, so my silver ones dont stand out against my black wheels does anyone know what size the bolts are? looked at a few on Ebay, and they state the wheel bolt cap size needed is 17mm? I would measure mine, but its at AMD, and would...

hey all, a friend who owns a seat cupra 180bhp 2005(AUQ) killed his turbo charger.. we are now looking for a bolt on replacement for his turbocharger. what turbo could be very accessibale right from low revs like the k03? were looking for something to go off at about 3k rpm... does the k04...

Finally got my car on the road on monday, driving home from work today and got a empty bit of road, gave it some in 2nd and 3rd FOR THE FIRST TIME, and clatter.....checked when i got home and one of the bolts holding on the D/P is missing. What can be used to hold these on? I have been...

Hi guys, little bit a damper...atually quite a big one. After inspecting the BBS rims I bought a little better, I came to the conclusion that the holes are for m14 bolts, whereas the Cupra uses M12 bolts. Is there any way I can still use these rims, or have a made a horrible mistake...

okay, yesterday i put a deposit on an audi tt quattro 225. after some thinking ive decided not to have the tt and keep my cupra t. its a 2002 60k on the clock and i paid £5000 for it only 4months ago. looking at the 0-60 times theres only a 0.3 of a second between them and the tt'sinsurance...

ok firstly looking at my wheels and it seems that the last owner has rounded the wheel bolt off to like a size 13 and i cannot get it off.they have even drilled about a 6mm drill into it and i still cant get it off any ideas. also, i need an oil change on my car and im not sure whats the best...

Hey people im sick of blowing push down coil packs, ive been told that bolt down ones are more reliable but im having trouble buying them, every parts company i phone will only order the orignal type for the car does any1 know a website where i can order them from please thanks in...

We have an old S reg seat Ibiza salsa. This morning my good lady was driving to work when everything went pear- shaped. A loud thud then twang and the car stopped. long story short, the bolt securing the crankshaft pully sheared. The pulley came away from the engine leaving the timing belt...

Hey, I have 15" SE Alloys. Off to put some 17" Starfish on. The same bolts from the standard 15" be ok for the 17"'s? Quick answer would be appreciated :)

My locking wheel bolt key has rounded off (cheers tire garage), I have heard that there are some methods of getting the bolts out without the key, could someone tell me how this is done? If you don’t want to post it on a forum, then could you PM me? I don’t mind ruining the bolts as I have a...

Does anyone know what seat type the standard bolts are on an LCR? Radius or Tappered? I would have a look at the ones on but im wanting to order some more right now and im at work so cant take one off

Right me being stupid ive dethreaded what the bolt locks in to on the rear wheel!! Does anyone have a part number for what i need to replace as i dont know what its caled or how much its guna cost!! Does the rear have a hub that has a thread and the bolts go into this??? HELP!