big

Firstly don't laugh..... I've just got a mp3 HD changer thing for my LC, and I wanted to reclaim my glove box. So I turned the mounting brackets upside down and drilled two smallish hole in the bottom of the dash on the passenger side. Then...... ......all unholy hell broke loose...

Hi This weekend i decided to fit a Cupra ARB on my PD130 to go with my previously installed Cupra suspension:D But now i wish i didn't.. Ever since,i have been getting a very loud clunking noise from the driver side, usually when i go over bumps whilst driving. You can also hear it if...

Right ive currently got ebc discs and pads all round but am wanting to upgrade. which is best value for money and performance wise Brembo 4pots and 300mm discs(i think thats correct size) Tarox 6pots and 280mm discs? is their any others i should consider?

I need anyone's help as my Seat dealer doesn't know how to solve it. I just had a problem with my car that's been happening since new but it happened like 2 or 3 times a year. But I've had it 2 times this same month so... When I'm driving, at full throttle, the cars starts to pull and...

right guys something happened to my car last nyt whilst driving it home!! and i dont know what it is!! these are the symtoms engine management light came on no power at all strugled to set off whilst being extreemly lumpy sounds horrible like a subaru burbble any help would be...

Ok so basically I was coming out of a parking and there where some really ugly vibrators at the exit, the car ( Cupra R 2005 model only has 3.000km) vibrated kinda violent due to the hard suspension....Soon after, this noise started whenever I accelerate or brake hard.... it sounds like 'clack '...

Switched my car on friday night, drove a little way down the road. looked at my dash and saw that i had the engine management light, the EPC light and the traction control light on. car was running fine. i turned it off and started again to see if they went away but no. carried on driving, car...

Had my new exhaust dilevered yesterday which I hope 2 get fitted soon. Went for a drive yesterday & thought it was pretty hot so decided to switch on the aircon which as blowing hot air!!! Got home & checked under the bonnet & found that I had lost a load of coolant. Topped it up & drove...

Just wondering... Has anybody took the plunge and BT'd a Mk4 Beeza yet...?:confused:

hello there, i know the best way to do big turbo coneversions is to bolt it on and map it straight away , but i was wondering could you fit the turbo and possibly leave it on a 130 base map or indeed a 130remapped ecu for a while , could the ecu control the larger turbo ok ( adaption etc) or...

Tried my 9's on bk pic's if any1 can help me out with pic size's and how to reduce them pm me! Tried my 9 on bk lastnite b4 it goes away to get refurbed:funk: offset with adaptor will be et27 Any comments welcome and pic's of other peeps running 9's and theyre offset please

Hehe! So glad I found this forum today, I have been at the end of my temper :) I wonder very much if you could help please? I have recently purchased a Seat Lean Cupra R on a 04 plate. It is a kinda gun metal metalic grey - would anyone know the paint code code for this model please...

When I registered on SCn the detailing section was prob the quietest thread.... Its now really come to life, loads of you have learnt so much and jumped in and taken the bull by the horns. Its great to see so many improving their knowledge, technique and car's paintwork! [B)] WELL DONE...

Hi, Just bought a 1999 Toledo S, 1.8 20v (engine type AGN). Problem: 1. On a warm day when the car is cold is has trouble starting - I mean it has to turn over 20 to 50 times before it starts! But always starts. (Takes at least 10 to 15 turns when warm) 2. Terrible at idling (constantly...

If i fit uprated brake pad and discs to my car. Should i get cheaper insurance. Or will they find some way of putting it up. Even thow its a saftey mod. has this happened to anybody ?

Hers the script, i bumped a kirb with my ibiza cupra, after i done it the car would not move, every time i accelerated the car was dying, , , and the exhaust was popping, i have not been told it is PROBABLY the cam position sensor (G24), now after a couple of days there is a rattlin coming...

hi there all, coming home from work today my mk3 ibiza cupra felt really jerky to drive , then all of a suddon it just cut out. i tryed to start it a couple of time but it just kept happening , when it did the traction control light was on and i couldnt turn it back on?? now the engine...

Hey, i cant find a gearbox anywhere for my car apart from seat and they want £1,348 + 600 surge charger, But i cant get that back because my box has a hole init!! What am i goin to do, any ideas?? :(.. [:@]

Hey, Just spent the evneing trying to fit a neuspeed engine mount. I dont know how it compares to the powerflex or EIP (obviously the EIP is a complete unit) The kit has 2 bushes, but i couldnt find a way to use both bushes. the bolt just isnt long enough. Am i doing something wrong...

I was looking at Top Gear magazine in the newsagents the other day and at the back of the mag they have details of each car, some of which include a summarising quote from Jeremy Clarkson. For the new Leon his summary was something along the lines of: "They have ruined the looks. The Leon can no...