big

Looking at poss buying a Arosa for the other half but we have a youngster and need to fit a buggy in the car as well as a car seat. So as the title says will the buggy fit? or should I buy a Ibiza? Cheers

well its not a seat but here goes anyway sold my leon ihi and got this to go to work on this is how i got it 6 months ago then i fitted the cup kit fitted some R32 front and rear brakes and alloys ibiza cupra bushs then fitted a golf edtion 30 steering wheel...

Hey there, I've finally got some spare cash to upgrade the power cables under the bonnet from the stock (8 gauge I think) to 0Gauge. But I really don't feel like paying for someone to do a simple sounding job. I need to change the Chassis to battery -ve (found that one) Alternator to battery +ve...

How much more expensive is it to run a Big turbo car over a standard equivelent? In the ideal world where the conversion has been carried out to a high standard, on a 50k ish mile car (ibiza mk4/polo), running a IHI at 320 bhp and 470nm, how likely is it to bend/break rods, valves (or other...

Going to try and get some more power out of my ibiza 2001 cupra. Its Already running a full stainless system, bypass valve and filter. But Im really interested in changing turbo, and converting to something with more power? But What parts will i need, how much wil they cost and where can i...

Hi all, Whilst I had the wheel off the other day I noticed my CV clip was off! Have bought a new one from DMS and acquired some tile cutters from my neighbour as well as some CV Joint grease from Halfords but have 3 questions: - 1. Do I need to flush the joint out to get rid of any grit...

it would apear my spec clutch cannot handle 353 lb/ft :( i fried it on route to elsecar at the weekend can anyone recommend me a suitable replacement spec = o2m 6 speed, solid ally flywheel, uprated pressure plate, 1.8t, 373bhp 353 lb/ft i dont really want to go down the full paddle...

Onto my second Cupra now, I must be mad :D Bough this after the Cupra Was a gorgeous car, but I needed some fun again and for the mpg it did I could have had something much faster. So up for sale it went, was looking for a swap for either a LCR or another Cupra. A month down the line...

for all you derv leon fr drivers. not sure if this has been done yet but im going to post it anyway. my friend runs a remapping business and he has developed a way to remove the dpf and replace it with another downpipe. turn off the dpf sensors and then have the potential of a 230bhp remap. he...

I have newly bought an Ibiza FR and after getting it remapped ive decided to get some big brakes but what size can i get on using the original FR wheels ?

I have the AGU engine which has a big port head and a big port manifold. unfortunately i cannot fit TT injectors into the manifold, and so i have to install a small port manifold onto the big port head. not an ideal situation, but is there any downfall because of this? Just thinking, as the...

Well were here amongst some of the biggest names in motorsport! I say some because there are a couple who realy should be here but because of one reason or another cant make this season. These Toledo's have taken a huge amount of time to sort out and because we decided to use the other car its...

Would like to thank Iain for all the work he had put in to get my car ready for UD , and it paid off as it won again this year , 2 years in a row now

OK this is one area of the Ibizas I am completely clueless about and need some advice. I'm looking to change my brakes to a bigger setup in anticipation of running my hybrid K03S in the next couple of months. The question I can't seem to find an answer to is what's the optimum setup I can...

Hi all, dont know if this is the right section on her to be asking this, sorry if its not. Im looking to get the C U P R A lettering for the boot of my car, ive looked on ebay and all i can see are these ones...

Just wondered if anyone knew the torque value for the big end bolts. Ive got a feeling its 65NM but not sure if this is the mains or the big ends. If anyone knew this would be great!!! Cheers in advance :D

after nearly 18 months with my car the temperature gauge has never ever gone above dead centre, today i was driving down the motorway and it crept to the next line! i checked the water and for any obvious leaks but al seemed fine, turned the engine back on and it sat back at dead centre...

As the Title says.. Who has upgraded their Turbo on a Leon? Im doing a Garrett 3071 big-turbo upgrade soon - and im interested in knowing who did what and what the result is :o) Thanks guys...

Hi i have my leon fr 2007 in the last week the dealer change the cam shaft and cam falower ok and now the car after 10 m running turn off in the road and i retern the car to the dealer and they did not now what is the mistake after that they change my sport fuel pump to stock but it come...

Is there a write up on here laying out really basic options when looking at big turbos? I'm talking really simple stuff like: The turbos used expected bhp/torque gains from each A very rough idea on cost. I have a stage 3 mapped Audi TT at the mo. Lots of the basics like fmic...