Ibiza MK4 Alana Headunit Wiring

james.l · Nov 6, 2008

Hi,

Wondering if anyone can help me. I have recently purchased an aftermarket bluetooth kit for my MK4 Ibiza

, the car has the Alana standard headunit in it, and i need to know what the colour coding is. If someone could tell me who has maybe fitted an aftermarket headunit with manafacturer loom, which colour cable is for the power and which on for the ground. I think it is the two slightly thicker cables but i just wanted to make sure before i start cutting them open so i can split the current to power the bluetooth kit. Also, if anyone could tell me which cable is used for muting the stereo when a phone call comes in as well that would be greatly appreciated.

Any help would be great :clap:

james.l · Nov 6, 2008

Or in fact actually, has anyone just got the wiring diagram for the headunit, cable colour and use?? That would be even better

Nath. · Nov 6, 2008

red is permanent 12v

yellow is ignition switched 12v

black is earth

industry standard

james.l · Nov 6, 2008

this isn't the case with the back of my headunit, that is what i wa expecting to see, but that cables that go into the back of the alana are completely different. Has anyone changed their headunit and noticed there are no industry standard colour cables?

Nath. · Nov 6, 2008

Changed my alana for an alpine and it was all industry standard and just plug n play. some headunits require the red and yellow to be swapped though.

james.l · Nov 7, 2008

must be differant for the pre facelift then, because mine has a micture of brown & red's blue & browns. etc etc.... I will try and get some photo's later

tom_ibiza · Nov 7, 2008

does your bluetooth kit need to be hardwired or somthing???? thats strange, they are normally plug and play.... just get a voltmeter out mate thats the easiest way of finding out.......

james.l · Nov 7, 2008

yer it gets hard wired in so that the sound comes out of the car speakers and so that it mutes the radio when a call comes in. I would much prefere this that wearing a star trek earpiece to recieve my phone calls on.

Nath. · Nov 7, 2008

The sound comming from the headunit speakers is a bad thing.

From experience, the speakers in your car are not tuned for the spoken word, in order to hear properly you will need the volume up quite high. This is picked up by the mic and the person you are talking to gets that nasty echo

The small speaker that comes with the kit is tuned for speaking and IMO works way better

james.l · Nov 7, 2008

ok, i'm still very confused about what colours to tap the electricity source into though. I am going to mount the speaker that came with the kit in the car for the audio output for the phone, but i still have the problem of which cables are the correct ones to tap into for 12v supply, ground, and ignition switch oh and also mute. I will get some photos at lunch. Will post them back in an hour or so.

james.l · Nov 10, 2008

As Promised, Below are some pictures of the two wiring colours. Does anybody else have wiring behind their headunit the same as this?

Can anyone help?? Need to know which wires to tap into for ignition as well.

james.l · Nov 10, 2008

appears that one is brown & blue, and the other is black & Blue

Nath. · Nov 10, 2008

Go and buy a cheap £5 test meter, you don't need anything fancy to measure 12v. Even a home made test lamp would do

I think most people just plug an adaptor in for a new HU and never bother to find out what's what

james.l · Nov 10, 2008

but i need to know which wire to tap into for the ignition wire also. + for the radio mute when an incoming call is recieved.

james.l · Nov 10, 2008

Has anyone fitted an aftermarket headunit that might be able to tell me which wires are for which?

james.l · Nov 10, 2008

Right,

I have found out that

Brown & Blue is +12V Live Wire
Black & Blue is Ground Wire

Just need to find out which is the ignition wire now. The radio mute wire must be on the adapter that the steering wheel controls are on, as there is a mute button on the steering wheel. Does anybody know which wire this is?

PriceyFR · Nov 10, 2008

Hope this helps

Pricey

you might have to save the image to your computer to be able to see it properly, hope ya can make sence of it

james.l · Nov 10, 2008

thanks very much for the image, but this doesn't seem to be correct

The one with 20 pin connector seems to be operating the steering wheel controls, which is located nearest the top of the headunit, the one below that seems to be the speaker connectors, and the one below that is the electricity and ignition supply. Oh, this is going to take a serious amount of trial and error

PriceyFR · Nov 10, 2008

yeh that is right...

that image was right for my ibiza :S

james.l · Nov 10, 2008

i'm a little confused, i don't really understand german

Ibiza MK4 Alana Headunit Wiring

GT3071r LCR

GT3071r LCR

The Gentlemans Express

GT3071r LCR

The Gentlemans Express

GT3071r LCR

leg-end

GT3071r LCR

The Gentlemans Express

GT3071r LCR

GT3071r LCR

GT3071r LCR

The Gentlemans Express

GT3071r LCR

GT3071r LCR

GT3071r LCR

Stranger...

GT3071r LCR

Stranger...

GT3071r LCR

Similar threads