what have you done to your car today ?

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,240
1,090
Kent
I've obviously missed something along the way but what's the purpose of the rear bench cut out?...Custom fuel cell?

Sent from my SM-S906B using Tapatalk
 

Manic172

https://m.facebook.com/ManicMotorsport1
Dec 4, 2018
1,349
1,401
Hemel hempstead
www.seatcupra.net
60 litre fuel cell. I put it there 2 reasons. First is its protected by the cage and also weight distribution. Being pretty central, as the fuel level goes down . The car becomes lighter . But it shouldn't drastically change the ballance of the car as the front or rear won't be changing much in weight.
 
  • Like
Reactions: mty12345

iammooks

Active Member
Nov 27, 2018
1,784
1,172

mty12345

Active Member
Jun 17, 2011
3,907
538
bristol
Just ordered a new engine cover for £40 and a new inlet manifold trim for £25, seems like a bargain seeing as used ones usually sell for more than that.


 

Manic172

https://m.facebook.com/ManicMotorsport1
Dec 4, 2018
1,349
1,401
Hemel hempstead
www.seatcupra.net
Spares have arrived by wheel barrow...
17125096882431276213754937300872.jpg
any one need any bits. I only want the head and few nuts and bolts
 

iammooks

Active Member
Nov 27, 2018
1,784
1,172
Changing the battery seems to have made a lot of difference - the smoke on startup seems to have gone, even when I've left the car a few days, so I'm guessing when it was struggling to turn over, fuel was still being injected into the engine and the smoke was probably to do with that.

Changed air filter today in less than five minutes - it's much easier without the rounded off and rusty screws...

6e3b6ac2b6d1529a4bd12420f60fbf4d.jpg


Booked in to get the clutch done on Thursday - no way I'm buying an engine hoist and a gearbox jack just to do that once. I know some will say you're not a proper car person until you've done a clutch on your driveway, but meh...

Probably going to have a remap once the clutch is in. I'm not chasing power, so don't want to go down the rolling road route - I just want a bit more pull - anyone got any experience with generic maps?


Sent from my iPhone using Tapatalk
 

bruceR

Active Member
Apr 11, 2005
2,558
647
Monifieth, Dundee
Don’t do generic -s**t for engine longevity. Go for custom map, better for all round torque, fuel economy and power.


Sent from my iPhone using Tapatalk
 

Alexis27

Active Member
Dec 20, 2009
2,144
478
Manchester
Absolutely no issue with a generic map if you know it's decent map. You're actually safer with a generic than a dodgy custom map if the guy doesn't know what he'd doing.

But for some reason the generics like Revo and APR are more expensive now than a custom job. So the best is still using an expert to do a custom map - if you can find one, because plenty won't touch 1.8s and PDs any more because of age.
 

iammooks

Active Member
Nov 27, 2018
1,784
1,172
Trouble is that there's nowhere around here that I know of that's any good. Darkside is oop north and searching for anything within even 100 miles of Brighton brings up the usual suspects - the flashy websites with pictures of Porsches, BMWs and Audis that always turn out to be flash remaps from some national franchise.


Sent from my iPhone using Tapatalk
 

bruceR

Active Member
Apr 11, 2005
2,558
647
Monifieth, Dundee
Absolutely no issue with a generic map if you know it's decent map. You're actually safer with a generic than a dodgy custom map if the guy doesn't know what he'd doing.

But for some reason the generics like Revo and APR are more expensive now than a custom job. So the best is still using an expert to do a custom map - if you can find one, because plenty won't touch 1.8s and PDs any more because of age.

At no point did I mention dodgy customer maps or mappers


Sent from my iPhone using Tapatalk
 

Nam-uk

Active Member
May 11, 2011
1,177
349
lancashire.
Have had a generic map done by Awesome Gti over well over 10 years ago for 150 quid on deal yea lol its been great but as normal you got to watch the clutch


On another note got the insurance though other day £269 quid up from £231 first alternative its an ensure company and no chance of dropping and both sites you cant get a quote its like they don't want to know been with them years, so had to use go compare and confused, got a quote for £210 for same policy though Arriva, 2 dam hours to sort all that out there websites are garbage if you have an account you may as well get a new account,

Diffidently got something to do with them daft EV milk floats as them dead tech cars get written off over nothing so huge claims and pickup company's most refuse to lift them

 
  • Like
Reactions: tracktoy

iammooks

Active Member
Nov 27, 2018
1,784
1,172
Knowing my luck I'll find out it's already mapped, given it started its life as a fleet car and had 80k on it by the time it was 3 years old and I bought it in 2008. Unless all PD150s are unusable in first gear and there's that much torque out of the box, in which case, more of that, please.

I'm dreading my insurance this year. It's still pretty low, around £250, but I've had to pay something like £45 for IAM membership to get it at that price, so god knows why I bother.


Sent from my iPhone using Tapatalk
 

tracktoy

Active Member
Jun 11, 2023
587
406
Diffidently got something to do with them daft EV milk floats as them dead tech cars get written off over nothing so huge claims and pickup company's most refuse to lift them

And the lack of garages / mechanics who can do the work to fix them so cost of loan car is adding to the bill as well
 
  • Like
Reactions: Nam-uk
Chris Knott Insurance - Competitive quotes for forum members