what did you and your mk3 leon do today
- Thread starter seatleon2012
- Start date
Actually washed it to remember what color it is
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Nice clean machine, but at this time of year will not last looking like that long.Actually washed it to remember what color it is
Sent from my iPhone using Tapatalk
After a long time im back 
Someone pushed rear window spray nozzle. Had to remove boot plastic to put it back.
Repaired summer wheels and they are on powercoating in new colour. And also new tyres are ordered.
Anyone anoyed about driver side compartment opening while driving into pothole?!
Poslano z mojega EML-L29 z uporabo Tapatalk
Someone pushed rear window spray nozzle. Had to remove boot plastic to put it back.
Repaired summer wheels and they are on powercoating in new colour. And also new tyres are ordered.
Anyone anoyed about driver side compartment opening while driving into pothole?!
Poslano z mojega EML-L29 z uporabo Tapatalk
Welcome back mate! Sounds like you’ve been having funAfter a long time im back
Someone pushed rear window spray nozzle. Had to remove boot plastic to put it back.
Repaired summer wheels and they are on powercoating in new colour. And also new tyres are ordered.
Anyone anoyed about driver side compartment opening while driving into pothole?!
Poslano z mojega EML-L29 z uporabo Tapatalk
. Can’t say I’ve had the driver side compartment open up but I’ve had the interior light trim fall out over a nasty speedbump!
Yes, the bass became more "round", like the subwoofer has doubled in size, without being too loud. Now I finally notice any difference when using the subwoofer slider in the sound settings menu.does it improve the sound in this case? or not
What Wheels are they mate look amazingActually washed it to remember what color it is
Sent from my iPhone using Tapatalk
"Performance 30/2 Machined" original SEAT 7.5x18 diamond-cut alloys I believe, which I happen to have as well.
And me
Was thinking of changing them, but might keep them and buy an APR stage 1 remap instead.
I always loved these alloys, even before I bought my FR. In my opinion, they were the best looking ones for rhe non-Cupra models. But the desire to change is always there so I bought a new set of gloss black Borbet Ys and shod them with winter tyres. Now I use my original alloys in summer, Borbets in winter.
Wheels are straight from the oven
Next step is got them ceramic coated,put new rubber on and on the car.
Poslano z mojega EML-L29 z uporabo Tapatalk
Next step is got them ceramic coated,put new rubber on and on the car.
Poslano z mojega EML-L29 z uporabo Tapatalk
Fitted a time attack roof spoiler, expecting some serious downforce in the corners, should shave a few minutes off the morning commute. It turns out that I can store a s**t ton of stuff in it too
You can use that time saved to clean the wheelsView attachment 36286
Fitted a time attack roof spoiler, expecting some serious downforce in the corners, should shave a few minutes off the morning commute. It turns out that I can store a s**t ton of stuff in it too
Just the wheels?! The whole car is a messYou can use that time saved to clean the wheels
, made the mistake of giving a proper clean about about a month back, just in time for more salt on the roads. Looked decent for about a day!
Last edited:
Added some LEDs to illuminate the door pockets.
I used two LEDs per pocket and spliced into the window switches (the grey wire used to illuminate switch) so they come on when the headlights come on. I need to reivsit the drivers door, as I doesn't seem to get brighter/dim the same as the other doors.
The pictures show them at 100% brightness.
Edit: had to rethink the earthing of the LEDs as they flickered and seemed quite dim at times. I was using a bolt on the door, but testing it, found it was quite a high resistance. Now using the brown cable at rear of each window motor and they're spot on now.
I used two LEDs per pocket and spliced into the window switches (the grey wire used to illuminate switch) so they come on when the headlights come on. I need to reivsit the drivers door, as I doesn't seem to get brighter/dim the same as the other doors.
The pictures show them at 100% brightness.
Edit: had to rethink the earthing of the LEDs as they flickered and seemed quite dim at times. I was using a bolt on the door, but testing it, found it was quite a high resistance. Now using the brown cable at rear of each window motor and they're spot on now.
Last edited:
Similar threads
