-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
OBDeleven modifications
- Thread starter bretth1974
- Start date
When I enabled this with Carista, it puts another option in one of the infotainment menus which needs ticking.
I will have a look, do you remember where the setting is?
Sent from my SM-N770F using Tapatalk
Having had a friend rear ended when he stopped and the brake lights were off, I personally would leave that alone. Yes it was the other persons fault, but they said it was the brake lights going off that made them drive into them (Yeah I know!).
Last edited:
That's just a crap excuse for a driver not looking where they are going. They were probably on there phone and didn't see the stationary car.
But I would still leave that setting alone.
Sent from my SM-N770F using Tapatalk
They were both stationary, when his brake lights went off he drove into him. But yeah crap driver. So anything that helps crap drivers from not driving into me the better lol
I never thought about it like that. I was going to be sympathetic to other road users. This is the first car I’ve had with auto hold and find it really useful but in the dark I can see how the brake lights irritate other drivers in stationary traffic behind me. That said I suppose if they left enough gap when stopped and not sat right up my arse it perhaps wouldn’t be so bad for them!
I've looked everywhere in the infotainment system but can't find any option for the alarm cherp.
Sent from my SM-N770F using Tapatalk
I was asked that on the Ateca thread, concluded it's one of those things VAG dont want you to change. The VCDS are customisation methods they allow between the brands plus some they haven't implemented. If they don't pull out the parameters from within the unit then it cant be changed. Some you need ODIS to do.
Feels like you need the original Ateca Kessy settings, if you have Kessy. The orginal way it was shipped in 2016 was one touch to lock and a long hold to get the mirrors in (ditto with the remote button). Was a bit irritating if you had shopping, weekend bag etc holding them away from the panels for that three seconds or so.
The mod I did was from the Spanish Ateca board. Think you need to reverse that to get back to the one touch for lock, long touch to close mirrors in.
The mod to get it around to how they are currently shipped now is here, reverse it to get what you want. Take care.
OBDeleven Tool for VCDS type of activity... working ones for the Ateca
This thread covers the use of the OBDeleven tool with worked, tested results on the Ateca 2016 - 2019 models. Check Obdeleven website for news on programming the new 2020 models on progress of this "The programming temporarily is not supported on models that are manufactured from 2020 and have...
www.seatcupra.net
Last edited:
You could follow thru this thread but it ends in a fizz... post 19 had it working.
Mirror Unfold on Engine Start
Apologies if this subject has been covered previously. I have searched through the forum and can not find a definitive answer. Can the Mirrors on a 2017 Cupra be coded to open on Engine Start as opposed to One Click of the Key Fob? Currently I have Mirror Fold-in on one click locking of car...
www.seatcupra.net
It's taken from the Obdeleven boards.
Leon Facelift Coding and Adaptions | OBDeleven
Not tried this as i dont have a facelift car but on the Golf forum a car with kessy shows the following coding as working - please update to confirm AUTOMATIC REPLACEMENT OF REAR VIEW MIRRORS (
forum.obdeleven.com
Post 21 where someone has an issue... but then the thread currently runs out. Theoldboy is "deleted"... Think that's probably him on the Obdeleven site. He excused himself... but I'm sure it's worth a try if you follow the links. I'm happy for the mirrors to go in and out each time I lock and unlock via one touch which is how most Seats to my knowledge now work (parked up on a busy road you would not want to leave them out for long). Seat gave up with the long touch method to get the mirrors in, they were trying to be a unique brand with that one
.
Last edited:
Hi,
I did it as follows....
Control Unit: 09 Central Electrics (Code 31347)
Funk Spiegelanklappung Modus
Old value: by convenience operation via remote control key
New value: by look command via remote control key
Signalisierung_Spiegelanklappung
Old value: on
New value: inactive
First change is for ‘one click’ operation.
The last change is for mirrors to be opened when the Ignition is started, instead of when unlocking the doors.
Hope this helps
That's what I posted above from an old Leon thread where it was covered. Glad it's working for you .
.
Do you have keyless start and entry?
Not sure if this is what @paddy6789 tried for me, but it didn’t work on mine.
The keyless and the button are suppose to behave the same .... touch, long press etc. (Touch = press, long touch = long press etc)
Saying that the rule breaks when Kessy goes into powering down mode to save the battery so the sensor shuts down on the passenger side, least in on an Ateca, walk round to the drivers side then it opens. Needs to be parked up for a few days to get it into that state. I did read it has a powering down functionality within the car, it does.
Probably need a healthy remote battery as well for a long press on that. Give you the thread... joke. You can put 2032's in them if it has the lower ones. Somewhere along the line Seat Kessy changed to the heavy duty ones. You wedge them in and case holds them in rather than the clip that's used on the earlier remotes that took 2025s.
www.seatcupra.net
.... touch, long press etc. (Touch = press, long touch = long press etc)Saying that the rule breaks when Kessy goes into powering down mode to save the battery so the sensor shuts down on the passenger side, least in on an Ateca, walk round to the drivers side then it opens. Needs to be parked up for a few days to get it into that state. I did read it has a powering down functionality within the car, it does.
Probably need a healthy remote battery as well for a long press on that. Give you the thread
... joke. You can put 2032's in them if it has the lower ones. Somewhere along the line Seat Kessy changed to the heavy duty ones. You wedge them in and case holds them in rather than the clip that's used on the earlier remotes that took 2025s.Remote battery CR2025 / CR2032 Replacement
ODBEleven reported that both keys were getting problematic on the error check. B147918 - Remote key 1 Voltage too low static B147A18 - Remote key 2 Voltage too low static I didn't get a screen warning thou. Had the car since November 2016, built in September so judged...
www.seatcupra.net
You just got to try it out and see. The old boy thread I posted has enough discussion on that. Models etc. I'd look out for the setting mirror on the infotainment after you have done it as per the Spanish post to see what it says. Just in case it comes up as off first or something like that and needs a toggle. Those are suppressed menus that VCDS enables which are built in but enabled. That might be why some people can't get it to work as per the original old boy thread. Kessy might be a red herring. Reckon Kessy sits on top of door locking / unlocking procedures as far as the mod is concerned.
As for making the car honk when locking and unlocking in lieu of seeing the mirrors in or out, that's just uncivilized as talked about on the old boy thread. I visually check mine after walking away or indoors if uncertainty of whether you locked it. Has its uses.
As for making the car honk when locking and unlocking in lieu of seeing the mirrors in or out, that's just uncivilized as talked about on the old boy thread. I visually check mine after walking away or indoors if uncertainty of whether you locked it. Has its uses.
Similar threads
