Cupra facelift with copper bits from eaziwrap?

[Adrian300]

Have any of you guys got pics of your cars with the copper inlays for front bumper scoops, badges, cupra letters, and mirror caps. I have monsoon grey cupra st and want to see what they look like. Thanks

Sent from my GM1913 using Tapatalk

 

[chouffe]

Some Eaziwrap modifications on my car

 

[Adrian300]

Nice u didnt do the bumper inlays then?

Sent from my GM1913 using Tapatalk

 

[chouffe]

Not yet but is is planned, this weekend actually

 

[ChrisM75]

Id love to do the bumper inlays, but I know ill mess it up.

 

[Adrian300]

Not yet but is is planned, this weekend actually

Nice, post some pics pls if u can

Sent from my GM1913 using Tapatalk

 

[Adrian300]

Id love to do the bumper inlays, but I know ill mess it up.

There is a video instruction of how to do

Sent from my GM1913 using Tapatalk

 

[chouffe]

Nice, post some pics pls if u can

Sent from my GM1913 using Tapatalk

I will for sure !

 

[Zer0]

Check out @eaziwrap on Instagram, lots of pics.

 

[Adrian300]

Had a look on there but a lot seem to have been taken with filters etc, just wanted to see how it looked under normal conditions daylight with no filtets etc.

Ive now ordered copper "S" badge inlays, the bumper scoop inlays cupra lettering and wing mirror tops. And the fitting kit he sells.

Hopefully dont mess it up when installing lol.



Sent from my GM1913 using Tapatalk

 

[chouffe]

Had a look on there but a lot seem to have been taken with filters etc, just wanted to see how it looked under normal conditions daylight with no filtets etc.

Ive now ordered copper "S" badge inlays, the bumper scoop inlays cupra lettering and wing mirror tops. And the fitting kit he sells.

Hopefully dont mess it up when installing lol.



Sent from my GM1913 using Tapatalk

There is no particular filter on my pictures. If you need to see something closer just let me know !

 

[OJ9693]

You could try masking it up and using plastidip? It's what i recently used for the bumper insert on the back to make it look black.
From what i've read, it doesn't mess with your parking sensors. As long as you don't apply too many layers.

 

[Adrian300]

There is no particular filter on my pictures. If you need to see something closer just let me know !

All good and yes can tell yours have no filter. Made my mind up and got it all ordered. Not 100% sure on wing decals yet... Although a lot more discreet than i thought looking at your pics @chouffe

Sent from my GM1913 using Tapatalk

 

[Chris99]

Could someone please give me their advice, I’ve had a p0234 on my 2010 Leon 2.0 tdi sport and going into limp. Vacuum checked all pipework and corresponding components and all hold vacuum. Actuator arm moves turbo vanes. Only thing I noticed is when vdcs testing boost solenoid vacuum is 25” idle the same as the vacuum pump is creating but when not being tested I’m only getting 16.5” idle. Might be normal but I assume I should have 25” vacuum when the Solenoid valve is on. Could this be the ecu being sent wrong information by MAP or MAF sensor?

 

[Adrian300]

Could someone please give me their advice, I’ve had a p0234 on my 2010 Leon 2.0 tdi sport and going into limp. Vacuum checked all pipework and corresponding components and all hold vacuum. Actuator arm moves turbo vanes. Only thing I noticed is when vdcs testing boost solenoid vacuum is 25” idle the same as the vacuum pump is creating but when not being tested I’m only getting 16.5” idle. Might be normal but I assume I should have 25” vacuum when the Solenoid valve is on. Could this be the ecu being sent wrong information by MAP or MAF sensor?

U may want to create a seperate post on this. People with the knowledge wont see this here.

Sent from my GM1913 using Tapatalk

 

[chouffe]

Not yet but is is planned, this weekend actually

Sorry guys, that will not be for this weekend, the parcel is still at the custom...

 

[Cupra_Jay_300]

I did have the bumper inlays but I ended up fitting the Cupra R grills instead. Have a look at my Instagram for pics - ha11_cupra

 

[chouffe]

I did have the bumper inlays but I ended up fitting the Cupra R grills instead. Have a look at my Instagram for pics - ha11_cupra

Oh interesting ! Why did you make this change ?

 

[Cupra_Jay_300]

Oh interesting ! Why did you make this change ?

The Cupra R Intakes are OEM and look so much better than the original Cupra intakes & vinyl inserts (In my opinion)

 

[Adrian300]

Fitted the bumper inlays, badges and mirror tops, pretty pleased with how its turned out.

Sent from my GM1913 using Tapatalk