SPECIAL 3D Printed Leon 1M Parts & Ideas Thread

[Leon20vt4]

That's really impressive. Lot of hard work and many hours behind CAD program.

Well Done. Hope to see his "sisters" - the side grills - to make a all winner product.

Regards.

Hey mate, thanks for the compliment... Yes endless hours so far to be honest. Different cad and 3d programs to make it all come together. Side grills are on the way

Sent from my RMX1993 using Tapatalk

 

[AndrewJB]

3D printers are amazing pieces of kit! cant wait to see the results.

 

[Leon20vt4]

Hey guys just finished the website today! the facebook page as well! the grills are open for preorder starting now!

https://www.eurusperformance.com/

https://www.facebook.com/EurusPerformance/

 

[Leon20vt4]

Sent from my iPhone using Tapatalk

 

[Sparkie]

Sent from my iPhone using Tapatalk

Top draw mate.
I’ll be ordering.

Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

 

[Sparkie]

Will you try the boot pull handle too ?


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

 

[Scotty_b]

Will the grill take original seat badge or will it be printed as part of it?


Sent from my iPhone using Tapatalk

 

[Leon20vt4]

Will the grill take original seat badge or will it be printed as part of it?


Sent from my iPhone using Tapatalk

The grill will take the custom Seat Badge as it can be added onto the order. 3 different style Seat Badges or the New Cupra Badge or a custom badge of your own. It’s all on the website


Sent from my iPhone using Tapatalk

 

[Leon20vt4]

Will you try the boot pull handle too ?


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

Ya it’s on the list bud, I’m pretty sure this grill is one of the hardest things I’ve wanted to do in 3D modeling and printing. No room for error in Firmenteile and also with the hood latch pull coming through. It wasn’t easy... but once the sales and production gets rolling with this I’m able to focus on designing the other parts on my list! Which won’t take nearly as long as this grill. There is a lot more to come, especially with all the quarantine time hahaha


Sent from my iPhone using Tapatalk

 

[Battoussai]

Ya it’s on the list bud, I’m pretty sure this grill is one of the hardest things I’ve wanted to do in 3D modeling and printing. No room for error in Firmenteile and also with the hood latch pull coming through. It wasn’t easy... but once the sales and production gets rolling with this I’m able to focus on designing the other parts on my list! Which won’t take nearly as long as this grill. There is a lot more to come, especially with all the quarantine time hahaha


Sent from my iPhone using Tapatalk

Congrats. It's quite OEM. Nice design and good finishing. Did you do the lower grid too?

 

[Leon20vt4]

Congrats. It's quite OEM. Nice design and good finishing. Did you do the lower grid too?

You mean the center lower honeycomb grill? Like with the car plate delete?


Sent from my iPhone using Tapatalk

 

[Battoussai]

You mean the center lower honeycomb grill? Like with the car plate delete?


Sent from my iPhone using Tapatalk

Yes, that one. Mine is OEM and surrounds the plate.

 

[Connor H]

Yes, that one. Mine is OEM and surrounds the plate.

You can delete that and get generic honeycomb mesh and cut to fit.

 

[Leon20vt4]

Yes, that one. Mine is OEM and surrounds the plate.

If you’re looking for one like this... no unfortunately I don’t make them. They are a big custom job with a lot of cutting etc. tbh you’re better off doing what most of us do and that’s cut and install a grill of our own.


Sent from my iPhone using Tapatalk

 

[Leon20vt4]

This is what I did and most of us do. Looks good for it being not a lot of work


Sent from my iPhone using Tapatalk

 

[Battoussai]

This is what I did and most of us do. Looks good for it being not a lot of work


Sent from my iPhone using Tapatalk

You are all right! That's a nice visual and not a lot of work. It's almost copy paste

 

[Oliver andrews]

Hey Gents just wanted to make a thread of all of my progress with my custom parts for our Cupras and Cupra Rs. I will start out with a list of everything that will be made, all designed and manufactured by me here in Germany

If you guys have any requests or ideas please comment below! I would love to here what anyone needs or wants.

List for 2020

Cupra R Canards
Front Diffuser Small
Front Diffuser BIG
Rear Diffuser Fins
Rear Diffuser BIG
Wing Risers or Wing Extension
Gauge pods (DIN/steering column/pillars/vents
Rear Cupra R tow hook cover
Cupra R upper front Grills (honeycomb)
Custom Logos for front grill and rear hatch
Cupra R Jack point covers
Leon 1M custom switch panels
Audi TT jacking points
Induction Kit with trumpet
Heat sheild

For fun

Cupra Shift Knobs
Cupra Keychains
Cupra Wallet/cardholder
Cupra Phone Cases
Custom LED Headlights with LED turningsignal/DRL

What is everyone interested in! This gets me excited what all can be made for our wonderful cars!

Common materials that can be used
ABS
Nylon
TPU
Silicon
Carbon/plastic Hybrids

Sent from my Note_7P using Tapatalk

Hi mate I’m new to this forum stuff to be fair the only reason I became a member is because of this post!!

for love or money I can not find a Cupra R upper front Grills (honeycomb)

please please please do me one for my car

hope to hear back from you soon

cheers Olly

 

[Oliver andrews]

Hi mate I’m new to this forum stuff to be fair the only reason I became a member is because I seen how amazing that 3D printing is

for love or money I can not find a Cupra R upper front Grills (honeycomb)

please please please do me one for my car

hope to hear back from you soon

cheers Olly

 

[Leon20vt4]

Hi mate I’m new to this forum stuff to be fair the only reason I became a member is because I seen how amazing that 3D printing is

for love or money I can not find a Cupra R upper front Grills (honeycomb)

please please please do me one for my car

hope to hear back from you soon

cheers Olly

Hey Olly! Welcome to the forum, the secret is bud they don’t exist for the Cupra R. The only front grills are the OEM grills... but they’re unicorns and if you find one it’s super expensive like 120-150 quid.

That’s one main reason I make them now! Because we 1M Cupra R guys need them!

Go to my website and fill out a contact form bud! I can help you out better there!

Eurusperformance.com


Sent from my iPhone using Tapatalk

 

[Jay20VT]

Hey Gents just wanted to make a thread of all of my progress with my custom parts for our Cupras and Cupra Rs. I will start out with a list of everything that will be made, all designed and manufactured by me here in Germany

If you guys have any requests or ideas please comment below! I would love to here what anyone needs or wants.

List for 2020

Cupra R Canards
Front Diffuser Small
Front Diffuser BIG
Rear Diffuser Fins
Rear Diffuser BIG
Wing Risers or Wing Extension
Gauge pods (DIN/steering column/pillars/vents
Rear Cupra R tow hook cover
Cupra R upper front Grills (honeycomb)
Custom Logos for front grill and rear hatch
Cupra R Jack point covers
Leon 1M custom switch panels
Audi TT jacking points
Induction Kit with trumpet
Heat sheild

For fun

Cupra Shift Knobs
Cupra Keychains
Cupra Wallet/cardholder
Cupra Phone Cases
Custom LED Headlights with LED turningsignal/DRL

What is everyone interested in! This gets me excited what all can be made for our wonderful cars!

Common materials that can be used
ABS
Nylon
TPU
Silicon
Carbon/plastic Hybrids

Sent from my Note_7P using Tapah

Hey Gents just wanted to make a thread of all of my progress with my custom parts for our Cupras and Cupra Rs. I will start out with a list of everything that will be made, all designed and manufactured by me here in Germany

If you guys have any requests or ideas please comment below! I would love to here what anyone needs or wants.

List for 2020

Cupra R Canards
Front Diffuser Small
Front Diffuser BIG
Rear Diffuser Fins
Rear Diffuser BIG
Wing Risers or Wing Extension
Gauge pods (DIN/steering column/pillars/vents
Rear Cupra R tow hook cover
Cupra R upper front Grills (honeycomb)
Custom Logos for front grill and rear hatch
Cupra R Jack point covers
Leon 1M custom switch panels
Audi TT jacking points
Induction Kit with trumpet
Heat sheild

For fun

Cupra Shift Knobs
Cupra Keychains
Cupra Wallet/cardholder
Cupra Phone Cases
Custom LED Headlights with LED turningsignal/DRL

What is everyone interested in! This gets me excited what all can be made for our wonderful cars!

Common materials that can be used
ABS
Nylon
TPU
Silicon
Carbon/plastic Hybrids

Sent from my Note_7P using Tapatalk

Hi there

Thanks for this. I do need a couple of items . Jack point covers sprayed in the Leon Artic Grey LS7N. Also from splitter for LCR would be good?
What are your thoughts on shipping etc.
Thanks again