-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
Kev's Mk2 Leon Cupra R now APR stage 2+
- Thread starter kevscupra
- Start date
Kev's Mk2 Leon Cupra R stage 2 now BCS Powervalve
Abit of an update, Car is now booked in to AKS tuning for the 25th of July. I was going to fit the parts myself but the gf wants a few days in London so I've used this as a excuse to pay Alex another visit.
Parts to Fit are;
High Flow Turbo Discharge Pipe (going to get the bayonet done)
Peron Intercooler
High Flow Throttle Pipe
AKS Throttle Body Spacer (for future wmi installation)
Forge Throttle Body Hose
APR RFD
Inlet Valve Cleaned
R-Tech PCV Delete
Pagid RS 4-2 Blue Front Brake Pads
S3 Rear Caplier and Carriers (just sent to BrakeCaliperRefurbs to be refurbed in red to match my Brembos on the front)
Ferodo DS2500 Pads For The Rear
Drilled Rear Discs
Hell Braided Rear Brakes Hoses.
I think that's everything, once everything is fitted I'll have to sort out going to Awesome to get the APR software updated and maybe on the rolling road to see what sort of power and torque I'm getting.
Couple of weeks ago I give my Cupra R a good wash, snow foamed, washed, dried , tardis, rinsed, iron-x, washed, dried, clay bar, polish, and waxed. I was very impressed with the results,
Abit of an update, Car is now booked in to AKS tuning for the 25th of July. I was going to fit the parts myself but the gf wants a few days in London so I've used this as a excuse to pay Alex another visit.
Parts to Fit are;
High Flow Turbo Discharge Pipe (going to get the bayonet done)
Peron Intercooler
High Flow Throttle Pipe
AKS Throttle Body Spacer (for future wmi installation)
Forge Throttle Body Hose
APR RFD
Inlet Valve Cleaned
R-Tech PCV Delete
Pagid RS 4-2 Blue Front Brake Pads
S3 Rear Caplier and Carriers (just sent to BrakeCaliperRefurbs to be refurbed in red to match my Brembos on the front)
Ferodo DS2500 Pads For The Rear
Drilled Rear Discs
Hell Braided Rear Brakes Hoses.
I think that's everything, once everything is fitted I'll have to sort out going to Awesome to get the APR software updated and maybe on the rolling road to see what sort of power and torque I'm getting.
Couple of weeks ago I give my Cupra R a good wash, snow foamed, washed, dried , tardis, rinsed, iron-x, washed, dried, clay bar, polish, and waxed. I was very impressed with the results,
Last edited:
Lovely updates! When you say the bayonet connector, is that meaning get it removed so you can use silicone hose and a jubilee clip? Which bayonet will you be getting removed? Have any pics? 
Last edited:
Lovely updates! When you say the bayonet connector, is that meaning get it removed so you can use silicone hose and a jubilee clip? Which bayonet will you be getting removed? Have any pics?
Yeah the bayonet connector on the turbo discharge pipe, I've got a 63mm hose connector 100mm that will be welded into to the turbo discharge pipe then the intercooler hose will just jubilee clip on. I've seen a few people do this as its known to blow the bayonet connector an cause a boost lose. Am sure AlexK1 and Kebabwarrior have both done it on their Leon's. I'll try find a pic for you.
Another quick question Kev, do you have a link to where you got the celtemp hpfp protector from?
Stunning car mate! Advice on getting that shine on that yellow?! Struggling to get a good shine on mine! Best products?
Kev's Mk2 Leon Cupra R stage 2 now BCS Powervalve
Thanks mate, to get the shine takes a lot of time and effort. I don't know the best products, but this is what I use, in order on the body work.
Auto Finesse Avalanche snow foam,
PoorBoys Super Slick Suds shampoo,
CarPro Iron X,
AutoSmart Tardis,
AutoGlym Super Resin Polish,
AutoGlym HD Wax,
Think that's everything, hope it helps.
Thanks mate, to get the shine takes a lot of time and effort. I don't know the best products, but this is what I use, in order on the body work.
Auto Finesse Avalanche snow foam,
PoorBoys Super Slick Suds shampoo,
CarPro Iron X,
AutoSmart Tardis,
AutoGlym Super Resin Polish,
AutoGlym HD Wax,
Think that's everything, hope it helps.
Last edited:
I'm gutted I never got mine that far, but tbf it needed quite a few things done before I would have even contemplated going stage 2+ haha.
I thought the brakes were ok but stage 2+ on standard brakes AND pads!!
Aye mate it's all back to standard now I'm ready to get rid
Bearing in mind this car has been modified, it's been soooooo reliable. Not given me any grief except for that rear drivers side lock now working.
I'm gutted I never got mine that far, but tbf it needed quite a few things done before I would have even contemplated going stage 2+ haha.
I thought the brakes were ok but stage 2+ on standard brakes AND pads!!
Aye mate it's all back to standard now I'm ready to get rid
I messaged you regarding the Revo on the mk5 forum. But missed your bcs exhaust thread
I'm gutted I never got mine that far, but tbf it needed quite a few things done before I would have even contemplated going stage 2+ haha.
I thought the brakes were ok but stage 2+ on standard brakes AND pads!!
Aye mate it's all back to standard now I'm ready to get rid
I would rather make the car handle better and stop quicker before making it faster.
I wasn't happy with the standard brakes that's why they were changed straight away, but stage 2+ on standard brake set up I would never have done.
What you changing the Cupra for? Family wagon??
Mine has been the same so far no issues apart from the rear passenger side door lock playing up.
Similar threads
