Who's running Pro-sport coilies on a LCR???

[DuamoLCR]

There £186 from veedubmachine.


Spelt wrong using my IPhone

 

[milner575]

There £186 from veedubmachine.


Spelt wrong using my IPhone

I'm sure if you have a word with Damian at dpm he could prob sort summat out

 

[supermatt]

As said got them on my lcr and cant fault them

 

[DuamoLCR]

I'm sure if you have a word with Damian at dpm he could prob sort summat out

I did he didn't have any.


Spelt wrong using my IPhone

 

[B47t0n]

Just fitted to my lcr
Brilliant ride honestly cannot fault them

Only down side I need : wheel spacers to clear the coilover nut

Also need shorted droplinks originals dont work

 

[George657]

I'm running originals on mine?
Just place a jack under the wishbone, jack up, so the spring compresses and then place the drop link onto the locating plate.

 

[B47t0n]

The drop link seems too long unless this is normal ?

Are you running spacers too ?

 

[George657]

Yea, running spacers.
If you compress the shock absorber the way I said, the drop link will slot into position.

 

[B47t0n]

The gap with no droplink between the arb and the shock tab is 330mm the length of my orginal drop links so u wouldn't even need to compress the spring to make it fit :S ill take a pic haha

 

[xDaNx]

Where's the cheapest place to get some of these at the minute? DPM says they won't have any for a few weeks :/

 

[George657]

But with the car jacked up the spring is under no tension.
Hence, jacking the wishbone up to bring the locating hole to approximate level.
That's how I did mine anyway.

 

[B47t0n]

Ill give it a blast pal see what happens thank you

Do you have 10mm front spacers ?

 

[B47t0n]

Where's the cheapest place to get some of these at the minute? DPM says they won't have any for a few weeks :/

I got mine from veedubmachine but I believe I got the last set I was struggling like mad to try find some

 

[George657]

Yea mate running spacers all round.

 

[B47t0n]

Just fitted vito 638 drop links and they work fine my only worrie is should the arb be under tension as I could move it up and down by hand with only the right hand side drop link attached

 

[Priz91]

I was thinking about buying these tbh.. So if i get them, i can run standard drop link by jacking the wishbone up and slotting the drop links into place. The get spacers as i was gonna put 15mm at the back and 10mm at the with standard cupra wheels?