My 1.9TDi Leon Mods

[Masterkm]

Are these quite strong plastic or thin flimsy stuff?

Sent from my LG-P920 using Tapatalk 2

They are pretty strong I would say, would require a bit of force to snap.

Looks good mate! One thing though, you need to get those door handles tinted to match your rears

The tints have never been done and are stock tints so I presume the quarters are the same as the rear windows

 

[benj1989]

Ok nice one I'm quite tempted by these.

Sent from my LG-P920 using Tapatalk 2

 

[Masterkm]

Spoiler Fitted

Got the spoiler fitted now finally After soo long. Well chuffed with the car now, just a few minor touches left to complete the car and then maybe sell it towards the end of the year for a Viper Green/White Scirocco GT

 

[gregdaisley]

Nice one buddy! What did you use to fit the spoiler? I'm going to be doing mine soon, so looking for a bit of a heads up.

 

[Masterkm]

Just used tigerseal and masking tape. If your getting it from a dealer then only use the primer solution from the kit supplied. Need to hold it in position for some time till it bonds and then tape it up and leave for 24hrs.

Hope this helps mate

 

[Masterkm]

P-Torque Stage 1 Remap

So I took the plunge and decided to go with the local remap company, the well known P-Torque.

Will is a great guy to have working on your car and offered great customer service and looking after the car.

It took an hour in total and from standard, the car did 110BHP on the dyno which I was suprised to see even though the book classes it as 105BHP. Will did his usual stuff to it and got it running at 151BHP and 260.8lb/ft Torque and took it for a test run before handing it back over.

Im well impressed with it now and only chose P-Torque as they were the best who were closest to me.

 

[gregdaisley]

Nice work dude! I take it these figures are at the flywheel and not the wheels?

 

[Masterkm]

Nice work dude! I take it these figures are at the flywheel and not the wheels?

I think so, I will upload all the pics and a graph so you can see but most likely flywheel. As you can see its my first time entering the remap world so dont know that much lol just the nice outcomes

PS is there anyway I can tell if its at the flywheel or wheels?

 

[gregdaisley]

That's cool mate! Just explains the 110 standard that's all

When I got my revo map on my 1.9 it felt like a completely new car! Well worth the money, I'm sure you'll love the hike in power

Your figures are really decent too, very similar to mine... So you should expect around 141bhp at the wheels.

 

[Masterkm]

My Day at P-Torque

Here is the graph of the before and after dyno runs, Will tried to print me a copy but printer didnt work so waiting on a PDF email from him atm.

Car finished on the Dyno and well pleased

Finally got bored and decided to stick a couple stickers on lol

 

[Masterkm]

Mudflaps Fitted Front and Rear

Finally got my Mudflaps fitted after the rain settled. Looks even better. Got my Triple R composites Front Splitter now too

 

[Jmerrie]

Looking really nice!!

 

[Noel McQ]

Nice looking motor again quite similar to my own running similar BHP. All you need is some lowerage and itl be awesome!!

Where did you get your stubby ariel?

 

[Masterkm]

Thanks, Noel.

Will get it lowered and the splitter fitted throughout the summer if possible, and the stubby aerial is a genuine VW one from ebay. I created a thread on stubby aerials in the MK2 section and a link is in that thread.

 

[Dan-Leon-08]

How easy was it to fit the rear parking sensors mate? thinking of doing on mine, did the front bumper come with the headlight washers on?

 

[benj1989]

How easy was it to fit the rear parking sensors mate? thinking of doing on mine, did the front bumper come with the headlight washers on?

Id find this usefull to mate. I find it sometimes hard to find a refference point with the car

Sent from my LG-P920 using Tapatalk 2

 

[Masterkm]

Rear parking sensors were already installed into the bumper I bought but the wiring is a doddle once you know which wires are which. The front bumper did not come with the headlight washers so I just bonded the caps on but could have bought with washers as it can be done

 

[Masterkm]

Lockwood Door Sills Now Fitted

Got mine fitted today and they look great and hide the scratches on my door sills now

 

[Masterkm]

Linear R Grille Fitted

Got a black honeycombe grille for £50 and took me about 10-20mins to fit.

Think the front looks alot better now, just need to get my splitter fitted. Holes are drilled just needs fitting

 

[Masterkm]

Triple R Splitter fitted now

After having it sitting in my front room since last month, found the time to fit it. What you guys think?