-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Poured two litres of coolant into my expansion tank and expecting to lose 2 litres in the next two days due to a leak somewhere!
Oh no! Must admit to losing a bit myself somewhere but it takes about 2000 miles to hit the alarm!
Can't see it anywhere!
Ak
Can't see it anywhere!
Ak
nah this is more like one trip of 40 miles lol, I've gone through 5 litres in 2 days.
Weird thing is though once its down to just below the sensor for low coolant it doesn't drop in such excess amounts then?
Weird thing is though once its down to just below the sensor for low coolant it doesn't drop in such excess amounts then?
I keep meaning to lift it up and check the bottom of it, doesn't leak until the car has reached temp so could be a split that is expanding with heat?
Also I found coolant on top of my intercooler yesterday so im hoping with that location that its not the radiator?
Also I found coolant on top of my intercooler yesterday so im hoping with that location that its not the radiator?
Mmmm
I have a tiny drop out the front end of mine when it's had a run. Think mines the rad too!
Ak
I have a tiny drop out the front end of mine when it's had a run. Think mines the rad too!
Ak
Well have been considering using radweld but I heard various putting off comments like, it will block up your water ways and then it will overheat again and probs f*** the headgasket because of the lack of flow.
szatkwon
Guest
szatkwon
Guest
Remove the plastic inner door.
Then you'll see a big metal plate that you have to release and use some silicone
or something other waterresistant sealing on the old seals.
Thats about it.
Rained earlier today and its still dry :>
Then you'll see a big metal plate that you have to release and use some silicone
or something other waterresistant sealing on the old seals.
Thats about it.
Rained earlier today and its still dry :>
Anyone done similar to this on a 110 TDI?
http://uk-mkivs.net/forums/t/413937.aspx?PageIndex=1
Let me know your thoughts?
http://uk-mkivs.net/forums/t/413937.aspx?PageIndex=1
Let me know your thoughts?
Last friday i fitted my new top mounts and bearings and a new pair of drop links took about 1.5 hours today i fitted my new Badger5 front braided brake hoses again about 1.5 hours. 
half an hour of that was sorting out my stupid gunson easy bleeder and it is a stupid bleeder.
half an hour of that was sorting out my stupid gunson easy bleeder and it is a stupid bleeder.
Similar threads
