golf mk4 4wd 1.8t gt35r Now 534bhp

[Solyarkin]

Lol. I use the same without handbrake cut

haha - i'm with handbrake)

i can't posted links yet(

i have 2.1 eurospec engine, full-race, garrett 35, AEM ecu...now 0.6 bar ~300 hp (westgate spring), 630cc injectors...etc

on next week we want to boost up, from 0.6 to ~2 bar (1200cc already have)

but now we have problem - timing belt tensioner "eat" belt

sorry for my english)

 

[Danny@INA]

What's up with the timing belt on 0.9 bar I made 375 at flywheel you can pm me the like or email it to me [email protected]

 

[Solyarkin]

Danny@INA
check mail

 

[Ronin225]

Danny, do you run an OE diff on your setup or an uprated LSD??

 

[Danny@INA]

Danny, do you run an OE diff on your setup or an uprated LSD??

Yeah both oe diffs

 

[Ronin225]

Do you think its woth uprating or does the OE haldex system do a good enough job?
Car will hopefully be seeing more track action so would want it to be able to withstand some serious abuse

 

[Danny@INA]

Do you think its woth uprating or does the OE haldex system do a good enough job?
Car will hopefully be seeing more track action so would want it to be able to withstand some serious abuse

Seems ok I can do 1.5sec 60ft they get a real hard time in my car as most of the time it's used is at pod

 

[Danny@INA]

We had the car at Santa pod for USC had the car put on the dyno we made 534bhp on 28psi and still on the base map but will have to get a bigger wastgate spring as 28 was as high as we can get

 

[Ronin225]

That is an impressive figure
Sorry i never made it down to have a chat, did you get my message?

 

[Danny@INA]

That is an impressive figure
Sorry i never made it down to have a chat, did you get my message?

hopeing to get about 630bhp when its running 100%

yeah just got your msg i will be back up there for gti fest in october

 

[Ronin225]

That is insane power, will have to meet up later in the year then mate

 

[Danny@INA]

https://fbcdn-video-a.akamaihd.net/..._=1312919552_0f815ba520995c6717453f6a13cd4b76

 

[RobDon]

Looks very quick!

 

[Danny@INA]

I'm just trying to get some better vid to put up

 

[Danny@INA]

https://fbcdn-video-a.akamaihd.net/..._=1312920832_43845214a3450ebfed3f57bcbb1ce4f5

 

[RobDon]

What times were you getting?

 

[Danny@INA]

What times were you getting?

1st run was a 12.1 @120mph
2nd was the same just need to spend some time in setting the car up now

 

[t0m]

Looks quick, sounds mint!!!

 

[caney]

1st run was a 12.1 @120mph
2nd was the same just need to spend some time in setting the car up now

1.5 60fts:yet only 12.1's? You should be mid 11's a least with that power,i did a 12.07@121 mph doing 2 sec 60fts due to spinning up the rears using crap tyres!

 

[Danny@INA]

1.5 60fts:yet only 12.1's? You should be mid 11's a least with that power,i did a 12.07@121 mph doing 2 sec 60fts due to spinning up the rears using crap tyres!

This weekend I was only getting 1.8 60ft I had the drive set to the from to much so was getting a lot of wheelspin and only done 3 runs so its still got a lot to come