my abs ans tcs is always on, but its my offside sensor, literately blew up hahah
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
my abs ans tcs is always on, but its my offside sensor, literately blew up hahah
Managed to fix the abs fault, simple fix with a £8 abs sensor.
Had a little accident the other day coming off my drive ripped the bumper clean off, along with cracking the grill along the mounting holes it also twisted my intercooler quite a bit.
Managed to straighten the intercooler but ideally I need annew one cause it's bashed and dented all over the place.
Just busy repairing and painting the grill now, luckily the bumper just needs painting, but it needed painting anyway.
This bit snapped clean off.
Repaired with fibreglass, 6" cracked on the other side too.
Had a little accident the other day coming off my drive ripped the bumper clean off, along with cracking the grill along the mounting holes it also twisted my intercooler quite a bit.
Managed to straighten the intercooler but ideally I need annew one cause it's bashed and dented all over the place.
Just busy repairing and painting the grill now, luckily the bumper just needs painting, but it needed painting anyway.
This bit snapped clean off.
Repaired with fibreglass, 6" cracked on the other side too.
That sucks mate 
(you updated the thread title with last months date)
Nice repair job though. Glad it's coming back together too.
(you updated the thread title with last months date) Nice repair job though. Glad it's coming back together too.
Thanks Joe, it does suck, it just seems one thing after another at the minute, but that's motoring!
Thanks for the heads up on the date, don't even know what day it is sometimes.
Thanks for the heads up on the date, don't even know what day it is sometimes.
No worries bud, are you going to take the opportunity to paint the grille pieces gloss black or something?
They were already gloss black, but rattle canned, so not that glossy, I am spraying them properly tomorrow with my spray gun and proper 2pac gloss black.
Also painted my intercooler black (with hammerite stone chip so it wont chip) and currently having my wheels powdercoated 'very gloss black' and Parada spec2's fitted.
Also painted my intercooler black (with hammerite stone chip so it wont chip) and currently having my wheels powdercoated 'very gloss black' and Parada spec2's fitted.
Thanks.
Car has some major running problems at the minute and every company I contact doesn't want to know!
Car has some major running problems at the minute and every company I contact doesn't want to know!
What problems are you getting, got any logs. Have you narrowed it down at all?
No logs Joe, haven't got vagcom.
Basically the car thinks the maf isn't connected. All I done was take the ducting off the other week to check another problem I have and it then ran like crap saying the MAF isn't connected.
Also I get the fault code air flow too high on the MAF, I thought this was the flat spot problem but I changed the MAF and still the same.
Ideally it needs logging or putting on a rr'd but I don't trust anyone up here, I am going to ring Jabba today as that's who mapped it.
I have contacted bill, Jabba and AMD hopefully someone will get back to me. I just don't know if other companys will touch it if they need to touch the map, can't afford to have it custom mapped again.
Basically the car thinks the maf isn't connected. All I done was take the ducting off the other week to check another problem I have and it then ran like crap saying the MAF isn't connected.
Also I get the fault code air flow too high on the MAF, I thought this was the flat spot problem but I changed the MAF and still the same.
Ideally it needs logging or putting on a rr'd but I don't trust anyone up here, I am going to ring Jabba today as that's who mapped it.
I have contacted bill, Jabba and AMD hopefully someone will get back to me. I just don't know if other companys will touch it if they need to touch the map, can't afford to have it custom mapped again.
just read the whole thread, what a build. well done to you mate. very, very nice!
hope you get the running problems sorted soon.
hope you get the running problems sorted soon.
Hasn't cured the flat spot , I am going to get some logs done DPM on here are local to me.
I spent today taking the coilovers off and copper greasing them ready for 4 wheel alignment next week, don't want them seizing up so I like to keep on top of them.
I start from the bottom and work my way up collecting the anti seize compound as I go up.
Noticed a damaged thread on one of them.
Cleaned up with a file.
Measurement taken
Waxoyled and fitted back to cleaned arch
Same on the fronts
Camber set and fitted back to cleaned arch
I also noticed that the OSF ABS wiring is starting to rub through on possibly the drive shaft so a job for tomorrow to tape that up, luckily hasn't went through yet.
, I am going to get some logs done DPM on here are local to me.I spent today taking the coilovers off and copper greasing them ready for 4 wheel alignment next week, don't want them seizing up so I like to keep on top of them.
I start from the bottom and work my way up collecting the anti seize compound as I go up.
Noticed a damaged thread on one of them.
Cleaned up with a file.
Measurement taken
Waxoyled and fitted back to cleaned arch
Same on the fronts
Camber set and fitted back to cleaned arch
I also noticed that the OSF ABS wiring is starting to rub through on possibly the drive shaft so a job for tomorrow to tape that up, luckily hasn't went through yet.
Started on this today, 3" intake pipe.
That is probably the hardest bit to do, it's actually a piece of 3" tubing with separate bits welded in to make a cone.
That is probably the hardest bit to do, it's actually a piece of 3" tubing with separate bits welded in to make a cone.
Hold the traction button for 10 or so seconds - turns evrything off - abs traction etc - great for drifting
lol
Well I finally had the flat spot sorted, went back to Jabba and they couldnt get there heads around it so they redone the map and that has cured the fault, so after a year of being down on power it's now running like a dream.
I recently sprayed my bonnet, it had 3-4 chips in it that I wasn't happy about. Had to be done in my garage at home as I haven't got my workshop now.
And sealed my wheels today ready for ed38 and traxs this weekend
I recently sprayed my bonnet, it had 3-4 chips in it that I wasn't happy about. Had to be done in my garage at home as I haven't got my workshop now.
And sealed my wheels today ready for ed38 and traxs this weekend
Similar threads
