Replacing some of the smaller engine hoses, help please (pic included)?

gazR

CUPRA
Apr 25, 2009
418
2
Derbyshire
how'd you get this metal clip off near the engine cover?

_MG_1072.jpg


just about to get round to changing this pipe but it went too dark, wasnt sire how to get it off anyway
 

itfben

DsignVinyl.com
Oct 24, 2009
2,000
1
nr. Tunbridge Wells
would 1m be enough or should I go two, I want to do all my vaccumm hosing in my engine bay like everything that can be dont really! so looking at...

1m x 4mm
1m x 8mm
1m x 16mm

what else?
coolant? screen wash? dv? any thoughts i want to do in 1 shot as postage at £6 ant cheap really.
 

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
would 1m be enough or should I go two, I want to do all my vaccumm hosing in my engine bay like everything that can be dont really! so looking at...

1m x 4mm
1m x 8mm
1m x 16mm

what else?
coolant? screen wash? dv? any thoughts i want to do in 1 shot as postage at £6 ant cheap really.

What's the 16mm for?

You were posting these questions on page two of this thread here (click) a couple of months back, weren't your questions answered there?
 

itfben

DsignVinyl.com
Oct 24, 2009
2,000
1
nr. Tunbridge Wells
i couldnt find the thread for the life of day and i never bought them i just posted on 3 threads about an hour ago as i needed answers quick, iv bought hoses about 10 minutes ago, thanks for find ing that mate :)
 

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
Bookmarks are your friend ;) I've got heaps of threads bookmarked in my "car stuff" folder in Firefox, only way I ever manage to find stuff again.

Still not sure what the 16mm stuff is for tho?
 

itfben

DsignVinyl.com
Oct 24, 2009
2,000
1
nr. Tunbridge Wells
iv got so many book marks its impossible to find what i want. I was subsribed to the thread, couldnt find it in my topics or subscribed threads search email and forum search i knew lee69 had posted but the ones i found didn't have him in it anyway all sorted now I ended up getting:

2m x 8mm
2m x 4mm
1m x 3mm

thanks to SamBryant for his help this evening and to you for your help on the thread i couldn't find :) and the 16mm was something someone had written down that turned out to be wrong.
 

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
iv got so many book marks its impossible to find what i want. I was subsribed to the thread, couldnt find it in my topics or subscribed threads search email and forum search i knew lee69 had posted but the ones i found didn't have him in it anyway all sorted now I ended up getting:

2m x 8mm
2m x 4mm
1m x 3mm

thanks to SamBryant for his help this evening and to you for your help on the thread i couldn't find :) and the 16mm was something someone had written down that turned out to be wrong.

Ah right, thought you maybe thought that was for the brake booster, the U-shaped section leading from the driver's-side end of the intake manifold around the top of the first intercooler hose - that's 10mm.

What's the 3mm for?
 

itfben

DsignVinyl.com
Oct 24, 2009
2,000
1
nr. Tunbridge Wells

8bit

Active Member
Feb 11, 2010
3,401
3
Aberdeen
OK, for my LCR I used

4mm for the FPR and N249/DV (I did the bypass but you can use 4mm stuff from intake mani to N249 then N249 to DV)
8mm for everything else, EXCEPT...
10mm for the U-shaped hose from the left-hand side of the intake manifold to the hard pipe on the other side of the first intercooler hose.

See below. Note that the two hoses that go from the start of the charge pipe to the N75 and the DV are not included in the above, these were specific hoses from Creation Motorsport.

imag0408q.jpg
 

wayne lcr

bored of it now
Mar 5, 2009
4,548
0
doncaster
the 10mm 1 ive done nearly all the way to the top and put the brake booster in there as well pics in me rr.the brake booster is the 1 from under the manni.as ive total got rid of all that leaky crap now.
 
Nimbus hosting - Based solely in the UK.