COOL remote windows feature available now!!!

[t0m]

yeah it is working

you go to the main site then downloads area find the software that way

btw it only goes and works

James, I got your PM's too on this btw. Just not had time to try it all out yet. Was at the gf's last night so car was put to bed early! Lol.

I'll have a go at this tonight I think!

Cheers for the PM's bud.

I know mate. My laptop was in the boot and everything! Poor thing had a rough ride home I think Have you done it to yours yet? You need to register for a key on the czech site, and paste the code in the registration email into the software to activate. Sort of similar to vagcom really, the GUI is similar. Then click a button and it works It's a cool little feature actually, used it more than I thought I would.




Aye, thanks for the PM instructions

Haha, that laptop must be ruined now, lol...

I'm going to try mine tonight mate when I have time. Been out and about today sorting things out and more to do so it will be attacked later and hopefully my windows will do the same thing

 

[tom0311]

Haha, that laptop must be ruined now, lol...

I'm going to try mine tonight mate when I have time. Been out and about today sorting things out and more to do so it will be attacked later and hopefully my windows will do the same thing

Scroll up for good step by step instructions. Shouldn't need more than that! It was missing a bit of plastic round the screen hinge when I got home Cost more than all the mods on the car put together too, there's priorities for you!

 

[t0m]

Scroll up for good step by step instructions. Shouldn't need more than that! It was missing a bit of plastic round the screen hinge when I got home Cost more than all the mods on the car put together too, there's priorities for you!

Remap is a no.1 priority in life lol.
Nice one mate I'm sunbathing now might get the laptop in the garden see if I can get reception and setup this windows feature a bit later on ready to go!
Will be good to have in this weather!!

 

[t0m]

Also on those motordiag links, put /EN on the end to get the page in English

I'm going to set it up now but trial it out later..

 

[Ape]

I'm going to try again later too, having a bit of trouble reading the language in the programme itself should manage to get it working now I've sorted out the COM port / cable issue.

 

[h0tr0x]

it is pretty straight forward really if you follow the instructions, try a couple of times aswell as it doesnt always work when i do it off the fob, but if i press and hold the button again it does.

 

[tom0311]

I also noticed there will be 2 proximities. One for locking/unlocking and another for the window operation. I can unlock from 10-15 paces away but the windows only work from 5 paces or so.

 

[t0m]

Ape, don't worry mate it's literally a few buttons you have to click. Very simple once activation key is emailed to you. Not long done mine

 

[Ape]

I've got the code already, had connectivity issues last night with the cable. That's sorted now (hopefully), seem to figure problems out in my sleep and wake up with the answer. Going to try with the meaning of life tonight and see what happens

Which few buttons are we talking about?

 

[t0m]

I've got the code already, had connectivity issues last night with the cable. That's sorted now (hopefully), seem to figure problems out in my sleep and wake up with the answer. Going to try with the meaning of life tonight and see what happens

Which few buttons are we talking about?

Lol, always the way! I'm sure you'll be fine when you try later.

These few:

Aktivace oken = activate windows> click the button

it will say something in czech > and are you sure?

just say yes

Once you have the registration key emailed to you, paste it into the box below the serial number and it will activate. Then all you need to do is click that 'Aktivace oken'

You even get to learn some Czech language along the way!

 

[Ape]

I see where the confusion is coming from. the Aktivace oken button is grey'ed out so I can't click it to activate it

 

[t0m]

I see where the confusion is coming from. the Aktivace oken button is grey'ed out so I can't click it to activate it

Indeed, this is what I found at 1st..

Once you paste that code in and assuming you have the laptop connected to the cable to the car with ignition on, it will activate and open up all the buttons.

 

[Ape]

Got another code and it worked. All buttons available.

It says it's done it, but doesn't work bloody software stuff. Give me a spanner and a hammer any day!

Also bust my liquid gauge borrocks

 

[RS6]

Ape its probably done it try it again with the software then disconnect

remember you need to hold the button on the keyfob down as soon as you unlock it and lock it if your battery in the keyfob is getting old and tired stand right next to the car you need to be close not far away

also let all the windows down then lock the car hold the button again after locking it your find at first it doesn't work then you get the feel for it and it starts to work windows will go up

when you were using the software did you see it writing the changes after you clicked it

 

[t0m]

Yeah Adam try what James suggests above. I thought it was activated at 1st, so tested the COM port and it come up with an error. Just had to paste in the activation code, then click that Czech looking 'Register' to the right of where you paste in the code, then it should do it.

 

[RS6]

you get it working in the end Ape?

 

[Ape]

Nope, need to have another go when I get chance. Spannering, hitting things with hammers and brute force jobs are no problem. Wiring, Electronics and Software I don't get on with

 

[robertbadlad]

how do you use basecode?

 

[wesrev87]

Just tried this and it worked pefectly. Thanks guys

 

[oldman]

guys, done this and all works a treat.
BUT, it does all 4 windows.
Any way it can be set to do only the front?

thanks