If you get cupra r, golf mk4, Octavia vrs front wheel drive rear calipers then they will just bolt on. Reason why I had to get spacers is that my ones are quattro versions. The spacer I have in the picture will only allow me to put on the 256mm vented discs not anything bigger. I was trying to source the right spacer to allow bigger discs because it is possible but have not had any luck.
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
I may have said this before (not been on here for an age!) but your car is bloody awesome & inspirational bud. 
BMW e46 M3 - Enhancement Detail
Detailed a lovely M3 on Saturday.
Thread can be found here: http://www.seatcupra.net/forums/showthread.php?p=3117962#post3117962
Detailed a lovely M3 on Saturday.
Thread can be found here: http://www.seatcupra.net/forums/showthread.php?p=3117962#post3117962
I been getting a few requests and questions about the Apexi air filter and how the car sounds etc. I decided to take a few videos on the iphone to show how it sounds driving reasonably.
Here they are:
*Would be good if I could find a video editor to rotate them the right way!*
I didn't give it full beans to really open the car up but it should give people who asked a good enough picture. When I did accelerate I was changing around 3k. To give a better picture turn it up a tad as when the volume is low the engine tends to drown out the induction noise.
Here they are:
*Would be good if I could find a video editor to rotate them the right way!*
I didn't give it full beans to really open the car up but it should give people who asked a good enough picture. When I did accelerate I was changing around 3k. To give a better picture turn it up a tad as when the volume is low the engine tends to drown out the induction noise.
Last edited:
Yea I still sleeping with it mate. Should be fitting it soon hopefully.You still sleeping with the .:R32 steering wheel Maz?
will hopefully get the fitting arranged before the weekend
it adds a few bhp and improves handling (all in the mind of course)
Thanks - wasnt sure if I gave it enough speed to properly give people a feel of the sound. It was strange at first but once on the move you hardly notice it unless you put your foot down.Your car sounds awesome! -It dosn't bother you on longer trips?
Also the detailing job looks good!
and btw, congrats on the 100pages!
100 pages...Good thing I done an index on page 1
was quite hard to hear, had to turn the volume up to 11! ;-)
Btw, I've found Adjustable Rear Tie Arms at Awesome GTI's for 195£, +65£ shipping!
Maybe you didn't have a problem with this, as the FWD has camber adjustment in the rear as std.?
I never had any of those problems so never considered anything on that section tbh.
Good News
----
R32 Steering wheel is fitted, looks and feels great.
I got a virtually new spare tyre from my best mate, a Pirreli P Zero Rosso for free. That will be going on the spare wheel asap
Bad News
----
Next door is having all manor of work done like roofing work. Both my mrs car and my car have been covered in some sort of cement / containments I cant identify. The containments are properly bonded on the cars.
I washed the Mrs car being super careful but there are scratches, swirls, marring...the paint is shocking. My Mrs is devastated as its a only 4 old. I got the machine out and had a go on one of the scratches, I virtually got rid of it but you can still tell its there.
I dare not try anything else on the car as I am not really sure how to approach the problem. I also dare not try and wash my car....
I am going to contact a specialist detailer to discuss what is required as I do not feel that I should be correcting the problem whether I can detail cars or not.
I am just shocked.
----
R32 Steering wheel is fitted, looks and feels great.
I got a virtually new spare tyre from my best mate, a Pirreli P Zero Rosso for free. That will be going on the spare wheel asap
Bad News
----
Next door is having all manor of work done like roofing work. Both my mrs car and my car have been covered in some sort of cement / containments I cant identify. The containments are properly bonded on the cars.
I washed the Mrs car being super careful but there are scratches, swirls, marring...the paint is shocking. My Mrs is devastated as its a only 4 old. I got the machine out and had a go on one of the scratches, I virtually got rid of it but you can still tell its there.
I dare not try anything else on the car as I am not really sure how to approach the problem. I also dare not try and wash my car....
I am going to contact a specialist detailer to discuss what is required as I do not feel that I should be correcting the problem whether I can detail cars or not.
I am just shocked.
Last edited:
Can't you just jet wash it off ? No sponge /wash Mit and blast the dirt off , cars get scratched at least it's not been keyed like mine to the primer , sure ur making it sound worse than it is due to you being a perferctionist
I am not going to ring the insurance company until I hear from the building firm doing the work. Ultimately I expect them to have insurance and to claim on their insurance for the work.
Dan - I did that for my Mrs car and still didn't come out well. I snow foamed it twice, gave it a good rinse and the containments are so embedded in the paint it scratch and marred. I know it will need claying but not sure what sort of damage that will do.
Dan - I did that for my Mrs car and still didn't come out well. I snow foamed it twice, gave it a good rinse and the containments are so embedded in the paint it scratch and marred. I know it will need claying but not sure what sort of damage that will do.
Similar threads
