-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
- Status
jamiebennett81
Guest
This is my current Passat PD130 remapped to 168bhp
thats lush!
very similar look to what I am going for as well
Thanks! I maybe selling the rims soon as I've had enough of two cars with whte alloys.... too much work looking after them lol
jamiebennett81
Guest
Lol Nooooooooo!!!
No way mate, it was a soft cloth,just to wipe the front lights over with before applying the film!
Have more faith in me
I was wondering the same thing!lol
Tint look good me good to see them for real too not sure if they suit every car so makes it hard to decide! Good thing is you know they are MOT proof and cop proof!
cordoba-jo
Guest
light tints look good 
I used the fly eyes tint on mine as well, they faded and went a bit yellowy after 6 months or so though so watch out for that
I used the fly eyes tint on mine as well, they faded and went a bit yellowy after 6 months or so though so watch out for that jamiebennett81
Guest
cordoba-jo said:light tints look good
Well as they only cost a tenner it's not a big cost to replace
Fitted mine today mate look really good and easy to fit took 30 mins for both lights
more pics in my readers rides
more pics in my readers rides
jamiebennett81
Guest
been umming and arrring about this mod for a while now
however surfing the UK Passat forum is a dangerous thing. In my aim to achieve a cleaner look and more simple lines on the car I have just purchased this
Also got a nice white uk passat sticker to put on tonight as well and got to start getting my ass into gear about the engine parts as well...no where near finishing these yet, as well as dewipering the back...tick tock tick tock
Going to purchase some white caliper paint at the end of the month as well
I sense a day off being needed before Edition......
Famously said everything will be done in time (that I can do for the show) and now its fast turning into a panic/last minute rush
however surfing the UK Passat forum is a dangerous thing. In my aim to achieve a cleaner look and more simple lines on the car I have just purchased this
Also got a nice white uk passat sticker to put on tonight as well and got to start getting my ass into gear about the engine parts as well...no where near finishing these yet, as well as dewipering the back...tick tock tick tock
Going to purchase some white caliper paint at the end of the month as well
I sense a day off being needed before Edition......
Famously said everything will be done in time (that I can do for the show) and now its fast turning into a panic/last minute rush
jamiebennett81
Guest
Got round to fitting the badgeless grill tonight. Was a bit fiddly with the bonnet catch but got there in the end
spot the difference between the OEM one (lower grill in the picture) and the new replacement one
Why oh why VW did not drill the holes out on the OEM one. Theplastic air feed literally sits directly behind the vented holes, note the word "vented"....so how the airbox has been getting air from the OEM grill I have no idea!
The new grill was an excellent factory like fit, and even better with all the holes very neatly cut. Should see a little improvement in performance (ha ha, performance and my car in the same sentence sound funny)
either way, I am very pleased with the result
Spot the difference
Fitted
My Heko wind deflectors arrived today. They are excellent quality, so I am looking forward to getting these fitted tomorrow hopefully
On the final stages of finishing two out of the three engine covers. Lacquering one up and the other just needs a few more coats and then I can lacquer that one too.
Picking up the CF engine bay bits too on Tuesday night, so I cant wait for that too. Going to look awesome
Also removed the bonnet lining tonight as it was a quick job, so will be cleaning that at some point, along with some stickerage
spot the difference between the OEM one (lower grill in the picture) and the new replacement one
Why oh why VW did not drill the holes out on the OEM one. Theplastic air feed literally sits directly behind the vented holes, note the word "vented"....so how the airbox has been getting air from the OEM grill I have no idea!
The new grill was an excellent factory like fit, and even better with all the holes very neatly cut. Should see a little improvement in performance (ha ha, performance and my car in the same sentence sound funny)
either way, I am very pleased with the result
Spot the difference
Fitted
My Heko wind deflectors arrived today. They are excellent quality, so I am looking forward to getting these fitted tomorrow hopefully
On the final stages of finishing two out of the three engine covers. Lacquering one up and the other just needs a few more coats and then I can lacquer that one too.
Picking up the CF engine bay bits too on Tuesday night, so I cant wait for that too. Going to look awesome
Also removed the bonnet lining tonight as it was a quick job, so will be cleaning that at some point, along with some stickerage
Last edited by a moderator:
jamiebennett81
Guest
Horrendous isn't it! No large objects will get in there as the bonnet protects it well, but I dont understand VW's design in feeding quite a nice air feed which fits very nicely onto the grill, to then cover it up....
Shame I dont have some before and after logs of the g/s, but im sure it will be an improvement
Shame I wont have the wheels or springs on in time for E38, but thats for next year
Rome wasn't built in a day
jamiebennett81
Guest
Here is one of the engine covers finished
Difficult to photograph white..... Holes are to be filled with the real carbon fiber caps
more to come this week
Difficult to photograph white..... Holes are to be filled with the real carbon fiber caps
more to come this week
Last edited by a moderator:
- Status
Similar threads
