Tony T 1985
Guest
sure it was about 45-50 quid was a couple of years ago so i can't remember exactly
gimmie 5 mins an i'll go an take it off the car
gimmie 5 mins an i'll go an take it off the car
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
No worries about doing it now mate just when is easiest for you yours is the one with te two red lights in, isn't it? I'll give dave at sere motors a shout when I can find a spare 50 quid haha
yours is the one with te two red lights in, isn't it? I'll give dave at sere motors a shout when I can find a spare 50 quid hahaTony T 1985
Guest
It's no bother - it's only 3 screws after all and if i don't do it now i'll never do it lol
i may as well list all the part numbers that are on the back of it as it lists all of them for some reason ???
i guess s and p are sides but i don't speak spanish so i cant be sure
Smoke S - 6L6945093D
Smoke P - 6L6945107B
Red S - 6L6945093F
Red P - 6L6945107
i'm sure it's the 107B part number i got but as i said it was 2 years ago so i can't remember exactly - sere motors will be able to check its the right one
HTH
Tony
and if i don't do it now i'll never do it lol i may as well list all the part numbers that are on the back of it as it lists all of them for some reason ???
i guess s and p are sides but i don't speak spanish so i cant be sure
Smoke S - 6L6945093D
Smoke P - 6L6945107B
Red S - 6L6945093F
Red P - 6L6945107
i'm sure it's the 107B part number i got but as i said it was 2 years ago so i can't remember exactly - sere motors will be able to check its the right one
HTH
Tony
Last edited by a moderator:
good news there bud, will be interesting too see where it goes now, i love them porsche rims, do they sell for much? Pm me if your selling them with a price. might be interested in them as another set but cant afford em just now. buy a cupra bumper!! make it a white cupra that they never made and get the grills done gloss black
I did a for sale thread last night but was half asleep so not sure lol unless the admin havnt been on but god knows! Might have to do another one haha yeh they are worth a fair whack usually and my tyres are all mint and comes with the right sized adapters which arnt cheap! I'll fire you a pm in abit mate or a link to the for sale add
Always been tempted by a cupra bumper tbh but itl only get done if I get a front mount
Always been tempted by a cupra bumper tbh but itl only get done if I get a front mount
This is gorgeous dude! I posted on another forum a while back asking how easy it would be to fit Porsche Twsists to a MK4 and a pic of yours popped up but only just found this!
Quick question, I have had a look through the thread but its so big couldn't find what I wanted to know lol! What size are the wheels (width) and what setup you got suspension wise?
I'm looking at some porker rims for mine in the future but not low enough atm so looking for coilies to replace the lowering springs first of all, either AP's or KW V1's!
Quick question, I have had a look through the thread but its so big couldn't find what I wanted to know lol! What size are the wheels (width) and what setup you got suspension wise?
I'm looking at some porker rims for mine in the future but not low enough atm so looking for coilies to replace the lowering springs first of all, either AP's or KW V1's!
No worries Scott
This is gorgeous dude! I posted on another forum a while back asking how easy it would be to fit Porsche Twsists to a MK4 and a pic of yours popped up but only just found this!
Quick question, I have had a look through the thread but its so big couldn't find what I wanted to know lol! What size are the wheels (width) and what setup you got suspension wise?
I'm looking at some porker rims for mine in the future but
not low enough atm so looking for coilies to replace the lowering springs first of all, either AP's or KW V1's!
Cheers mate, much appreciate! What forum did you see it on out on interest? Hopefully I might have got good feedback lol
Check out my for sale thread in the sale section and all widths and offsets are explained
rears are 8.5's and fronts 7.5's though. On weitec coilies with adjusters out atthe back and the fronts are about 10 threads off the bottom. I'd go weitecs as they are the non stainless version of the kw's and were only 400 when I got them which is miles cheaper than the kw's!
Some single piece bbs wheels hopefully. Love bbs haha just can't be doing with splits again, bugger to clean!
so the modding continues
. only thing with these twists is they seem to pick chips up so easily it must be the shape
Yeh my front ones are spot on, te the rear ones where they stick out and the rim is exposed cos the tyre is stretched, nowt too bad and got a touch-up pen for mine haha
Yeh continuing for now, would love big turbo but can't justify the 3.5k haha
Yeh continuing for now, would love big turbo but can't justify the 3.5k haha
Bit turbo isn't £3.5k!
A hybrid turbo is £1k (you used to be able to hybrid a 2nd hand turbo when I had mine which made it a LOT cheaper!!!) clutch is £800, FMIC and pipework is £500. Roughly. Hybrid map is £500. I managed to get my hybrid for about £1300. That was 2nd hand FMIC and piping, brand new clutch and 2nd hand turbo made hybrid.
I would honestly say get a FMIC if you dont already. They make a WORLD of difference and make it pull much better Best performance mod I did.
Best performance mod I did.
You missed off turbo back so that's another 400 so 3-3.5k adding up your values if you fancy helping me do mine for 1300 it would be much appreciated haha reckon if car stays itl be fmic and turbo back first before I decide on clutch and turbo. Just stuff like that rarely comes up for sale it seems, gutting!
so 3-3.5k adding up your values if you fancy helping me do mine for 1300 it would be much appreciated haha reckon if car stays itl be fmic and turbo back first before I decide on clutch and turbo. Just stuff like that rarely comes up for sale it seems, gutting!
You missed off turbo back so that's another 400
I would strongly recommened FMIC, turbo back exhaust and a remap. Push 190bhp and that's enough
I would strongly recommened FMIC, turbo back exhaust and a remap. Push 190bhp and that's enough
We all kno it's never enough
We all kno it's never enough
When I had my hybrid derv Ibiza, I loved it. But tbh, unless you go for a LSD, they power is useless. It rains, it's useless. The wrong tyres, it's useless. It was mega fun chasing/overtaking Impreza's/Lancers and S2000's - but I dont know if I'd do it all again if I were to get another derv. You're always worried about something going to give, or the clutch gonna slip. At the end of the day, an Ibiza isn't meant for R32/S3 power. I think a remap and FMIC best suits these cars without pushing them over the top.
Similar threads
