-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
andyj
There's no F in Quality..
KiwiCupra suffered clutch failure in Nov 08, but not the usual Mk2 problem. The clutch pushrod went straight through the release plate, skewering the gearbox to the engine.
In the process of sorting it (thread) I discovered the car had at some point been fitted with a gearbox from a 1990 Mk2 golf (stronger). The clutch that was bodged in was too small and I had to source a proper sized one (to match the box) and adapt the flywheel to fit.
The car has a lovely clutch action.![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
In the process of sorting it (thread) I discovered the car had at some point been fitted with a gearbox from a 1990 Mk2 golf (stronger). The clutch that was bodged in was too small and I had to source a proper sized one (to match the box) and adapt the flywheel to fit.
The car has a lovely clutch action.
Last edited:
So last weekend, I fitted....
New rear bearings
New rear discs and pads
20mm spacers on rear
New exhaust
and............
retrieved from my loft where they've sat for several months.....
AP coilovers. No more tractor stance! Not on it's arse, because it's a daily driver.
New rear bearings
New rear discs and pads
20mm spacers on rear
New exhaust
and............
retrieved from my loft where they've sat for several months.....
AP coilovers. No more tractor stance! Not on it's arse, because it's a daily driver.
Looking good Dave..... is this going to be a full project-diary or just nice piccies ?!?
Looking good Dave
Thanks guys!
Perhaps one 'project' is enough. But, the thing is, I really love this car.
Thats the thing with Mk2's Dave.. they do get right under your skin.
And it looks good now its been tickled with the lowering stick a bit
And it looks good now its been tickled with the lowering stick a bit
Cheers Rich!
Thats the thing with Mk2's Dave.. they do get right under your skin.
They really do. Off to get the front alignment sorted tomorrow now.
I had to buy a new catback exhaust on 'tinternet, John. £104 delivered. (as opposed to about £190 from Kwikfit). I found it didn't fit on the tail of my cat as it had a pushover section that was the same size - and it was about 3" too long there. I solved it by chopping the pushover section off and using it to sleeve the remaining section, then I used the OEM joiner section over that and the cat tail.
andyj
There's no F in Quality..
You had me lost with the "wave at Z comment" until I spotted his cheesy grin and special wave at the back of his motor !!! 
Looks so much better on the AP's
Will be interested to know what they perform like, as I've heard a few good sthings about them of late
Looks so much better on the AP's
Will be interested to know what they perform like, as I've heard a few good sthings about them of late You had me lost with the "wave at Z comment" until I spotted his cheesy grin and special wave at the back of his motor !!!
Looks so much better on the AP's
I've only had a few runs round the block to let it settle, Andy. Although my alignment is well out, the initial impression on the APs is good.
Car looks great Dave. Looks in very good condition.
It is true what Brummy says, they do get under your skin. You try and not let them but it just happens.
Definetely looks better lowered aswell.
Looks in very good condition. It is true what Brummy says, they do get under your skin. You try and not let them but it just happens.
Definetely looks better lowered aswell.
looks great Dave
Looks just like Claire's wee snot machine but without the bumps and bruises lol
I know Claire's has been in the wars recently, but last time I saw it (CPOP), it was in better condition than mine.
Similar threads
