My first Seat - Leon 1.8t Sport pics

[kineticz]

Ad that's only been lowered about 30mm got on the rollers fine

Well the result is... *drumrolls* 241.5bhp and 254.6lbft!!!

Pulls like a TDI and the front end lifts up like a drag car LOL

Check the p-torque section for a picture of the graph

 

[adam cupra 20vt]

Nice one mate bet your well chuffed with that!

 

[kineticz]

An IC hose popped off haha but otherwise it was no hassle and yup I'm very pleased how well the performance mods have come together.

Get yours booked in soon as ya can you won't regret it

 

[thePHILosipher]

the pics dont do the car justice, its a cracking motor mate, should be proud!!

 

[jamiebennett81]

loving the wheels

have to say though, still not a fan of the bumper, but fair play for you trying it though

 

[kineticz]

My camera is pretty crap lol hoping to get one for Christmas

Thanks again

 

[adam cupra 20vt]

An IC hose popped off haha but otherwise it was no hassle and yup I'm very pleased how well the performance mods have come together.

Get yours booked in soon as ya can you won't regret it

I'm saving mate I'm saving!........well I'm kind of more spending than saving

Did you panic when it blew a pipe off?

 

[kineticz]

loving the wheels

have to say though, still not a fan of the bumper, but fair play for you trying it though

I have a feeling that opinion might change if you saw it in person (or I upgraded my camera from a measily 1megapixel ), Phil today commented on how great it looks and Will who's seen it before the changes said how brilliant and mean it looks now.

But yeah like it or not I tried something different and the splitter sets it off nicely. Maybe when I get the Cupra skirts sprayed and fitted it will look more "wholesome". I have got Cupra honeycomb grilles to fit either side of the S badge instead of mesh btw which should give it a nice OEM touch.

Doing my best to look after the wheels mate they still got that gleam and should look even better when I fit my 20mm spacers all round and lower it a tad.

Cheers

 

[kineticz]

I'm saving mate I'm saving!........well I'm kind of more spending than saving

Did you panic when it blew a pipe off?

Heard Will revving it and then it must have got to like 6krpm and heard this loud POP then no more revvy revvy I kinda knew it was an IC pipe as it's happened to me before but on the smaller pipe that goes into the DV.

 

[adam cupra 20vt]

Heard Will revving it and then it must have got to like 6krpm and heard this loud POP then no more revvy revvy I kinda knew it was an IC pipe as it's happened to me before but on the smaller pipe that goes into the DV.

I think I would have been touching cloth at that point!

 

[kineticz]

hahahhaha

Blown turbo?


Seriously put all other spending on hold... Mortgage, missus, food, heating.... and go for the stage 2

 

[adam cupra 20vt]

I'm all ready mate just need the actual map itself, have got a 4bar FPR so can either go for Revo or sell it and go for Jabba or P-torque.

Revo is closer but most expensive, Jabba is custom and about 2hrs away, P-torque is cheapest and custom but its 3.5hrs away

Need MOT aswell

 

[kineticz]

What gains does the 4 bar FPR give mate? Never looked at one.

All I can say is P-torque maps are smooth and a joy to drive from what I've tested of it. I wasn't expecting 140 but was certainly hoping for it

I'm sure MOT will be sound after all the renewed bits you've had fitted.

 

[adam cupra 20vt]

You only need it for the Revo map as its very agressive......not really sure this is what I'm after to be honest, don't imagin it would be very good for the components either but I'm still reading up on it.

I'd be well happy with 240, good torque to

 

[kineticz]

Sounds like you're doing alot of research on it so good luck whichever you decide

 

[kineticz]

Not much luck with the seats! Removing OEM ones was a 15 minute job but the subframes are completely different, no chance at all of welding them onto the new seats. So I'm keeping an eye out for a well priced set of subframes for this seat and car.

On the plus side fitted my spacers and they look great, love the new stance. Need to take pictures when I get chance over Xmas hols after a wax.

 

[jamiebennett81]

I think you really need some german style plates to add a subtle touch of stying

 

[Qamar]

nice

 

[jamiebennett81]

nice

I see you have just spammed across several thread saying the exact same thing

original!

 

[jamiebennett81]

nice

I see you have just spammed across several thread saying the exact same thing

original!