ABS TCS and Bracke light on and beeping all the time and the fault code is 00668 anyone els ever had this??
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
cossydave
Guest
check fuse number 18 under the steering wheel. should be 5 volt fuse. Most probably you blew that one, as when you take that fuse out or it blows, the TCS light and ABS light will be on from startup and after a few seconds it will bleed 3 times. THen handbrake keeps flashing as well.
if that sounds like what you're having, check/replace the fuse
if that sounds like what you're having, check/replace the fuse
i had that once when the wires to one of my ABS sensors shorted and caused a fault on the ABS system.
what was with the battery? Or are you referring to the fuses on the battery? did one blow?
Last edited:
Did you get this sorted? I have the exact same thing happening with my LCR.
Any info would be appreciated?
Andy
on top of your battery you will have fuses and they corode.
Make sure nothing is coroded around them even the 10mm nuts
Take them off and clean them with sand paper copper grease them when you put them back in again.
this is what makes the car do this as I have had to fix a few.
Make sure nothing is coroded around them even the 10mm nuts
Take them off and clean them with sand paper copper grease them when you put them back in again.
this is what makes the car do this as I have had to fix a few.
on top of your battery you will have fuses and they corode.
Make sure nothing is coroded around them even the 10mm nuts
Take them off and clean them with sand paper copper grease them when you put them back in again.
this is what makes the car do this as I have had to fix a few.
Make sure nothing is coroded around them even the 10mm nuts
Take them off and clean them with sand paper copper grease them when you put them back in again.
this is what makes the car do this as I have had to fix a few.
I am getting this error now. TCS and ABS lights on from startup then 3 beeps and handbrake light flashes as soon as i start driving. Started happening after i disconnected the battery the other day and cleaned up the positive connector with wire wool.
I have cleared the fault with VAG-COM and when i do th auto-scan now it says 'no faults found'. However the lights are still there, and it still beeps 3 times on startup!!!![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
I have cleared the fault with VAG-COM and when i do th auto-scan now it says 'no faults found'. However the lights are still there, and it still beeps 3 times on startup!!!
make sure the lid of the brake fluid is on right and make sur it is at max level.
And the wire pluged in to the lid of the brake fluid is clean. use wd40 or some eletcrical cleaner as it can get dirty at time. plus a dirty abs censor can do is as well.
And the wire pluged in to the lid of the brake fluid is clean. use wd40 or some eletcrical cleaner as it can get dirty at time. plus a dirty abs censor can do is as well.
k_pt
Guest
I am getting this error now. TCS and ABS lights on from startup then 3 beeps and handbrake light flashes as soon as i start driving. Started happening after i disconnected the battery the other day and cleaned up the positive connector with wire wool.
I have cleared the fault with VAG-COM and when i do th auto-scan now it says 'no faults found'. However the lights are still there, and it still beeps 3 times on startup!!!
I'm having this problem at the moment, happened after is was try to install a boost gauge, i got a spark, and since then this started to happen, i suspect that is a fuse, but wich one?
please help
Similar threads
