Polo Gti Badger 5 Big Turbo

[barnsley]

oho..wonderfull project !
any other parts used? like what fuel injectors...fuel pump..?

last time i talked to bill it was a walbro pump and 730s injectors

 

[ryan_s3]

T series eh bill,still would have gone pukka gt3076 0.63.

 

[barnsley]

T series eh bill,still would have gone pukka gt3076 0.63.

whys that ryan

 

[ryan_s3]

As you can see i run a hybrid T3 but a proper gt30 is a better turbo.Garrett know what there doing .Anyway best of luck with it mate.

 

[barnsley]

thanks rayn

bills spec on it all i trust him

 

[ibizacupra]

T series eh bill,still would have gone pukka gt3076 0.63.

GT series have sucky bearings.. plastic cages.

This T series unit has metal case bearings, along the same lines as my GT35 had upgraded to. I dont want cage failure when this babys wound up.
that was my reasoning behind it.

GT wheels are more clipped than the T series, so this, in its .63 a/r hotside should spool just as nice as its GT equivalent, except this one is rebuildable where the GT is'nt

 

[air121005]

GT series have sucky bearings.. plastic cages.

This T series unit has metal case bearings, along the same lines as my GT35 had upgraded to. I dont want cage failure when this babys wound up.
that was my reasoning behind it.

GT wheels are more clipped than the T series, so this, in its .63 a/r hotside should spool just as nice as its GT equivalent, except this one is rebuildable where the GT is'nt

sounds like your in good hands Barnsley

 

[barnsley]

sounds like your in good hands Barnsley

thanks air

 

[barnsley]

well thats one week down few more to go

small update got an oil cooler kit off Robdon so that will be getting fitted soon

 

[ibizacupra]

FMIC will fit nice behind the bumper.. but some parts will need to relocate for pipework to run. I'll bell ya Liam and run it past you.

 

[suj]

looks beasting mate! gonna be a real animal when done

can't wait to see it done, any due date?

 

[barnsley]

FMIC will fit nice behind the bumper.. but some parts will need to relocate for pipework to run. I'll bell ya Liam and run it past you.

thanks bill bit more fun for you

looks beasting mate! gonna be a real animal when done

can't wait to see it done, any due date?

thanks got some idea of a time scale but no date as of yet

 

[creedy]

GT series have sucky bearings.. plastic cages.

This T series unit has metal case bearings, along the same lines as my GT35 had upgraded to. I dont want cage failure when this babys wound up.
that was my reasoning behind it.

GT wheels are more clipped than the T series, so this, in its .63 a/r hotside should spool just as nice as its GT equivalent, except this one is rebuildable where the GT is'nt

any updates and pics yet bill?

 

[Spud_G40]

Very nice car mate, looks like its going to be some machine.

 

[ibiza_adam]

WOW, fantastic project!!!

 

[barnsley]

a little pic thanks bill hope to have somemore soon looks nice and tight

 

[powernut]

nice project , depending on what power you will be happy with i reckon ull be going bigger with the turbo ,,, as im trying for 530bhp on a v6 24v 4motion with 730cc injectors ,,, arsome build thow ,, kep at it

 

[barnsley]

nice project , depending on what power you will be happy with i reckon ull be going bigger with the turbo ,,, as im trying for 530bhp on a v6 24v 4motion with 730cc injectors ,,, arsome build thow ,, kep at it

aim is for around 400 hope i dont have to go bigger any pics of your car

 

[roly]

Had a nose around this today while i was collecting my car

Certainly is a tight squeeze in there but should be an absoloute blast when done

 

[barnsley]

Had a nose around this today while i was collecting my car

Certainly is a tight squeeze in there but should be an absoloute blast when done

yet to see it in the flesh all i have is the photo looks tight but carnt tell how close with the picture hoping it will be a blast when its done