The shocks will not keep the car up but if the shocks are bottomed out just now the uprated shocks will allow the car to drop a little. But I doubt the ride height will change
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
pm'd you back dude...quite informative too
Hi,
Thank you for the photos and all that info. That was very good of you and i think i am going to try out the coilovers because they will only cost me £217 from ebay i and my friend is a mechanic so i wont have to pay much at all to fit them. I can always revert back to shocks if i dont like the ride i guess. All i have to do now is find some top mounts and spacers.
yeh, then you can decide on exact ride height. obviously the lower you go the stiffer it will get. i didnt uprate my top mounts, but never had any problems
paul-murphys
efr 6758 here i come
where you get yours from mate an was they easy to fit? cheers
can you post a pic up please of them fitted?
i had mine supplied and fitted at midland VW for £400. i also had 15mm spacers all-round as i needed to clear the front locking nuts on the coilovers. excuse the dirt:
Adam, what size nuts did you need to cover 15mm spacers? My coilovers arrived this morning only ordered them 2 days ago.
paul-murphys
efr 6758 here i come
Adam, what size nuts did you need to cover 15mm spacers? My coilovers arrived this morning only ordered them 2 days ago.
did you get yours off ebay?
paul-murphys
efr 6758 here i come
i had mine supplied and fitted at midland VW for £400. i also had 15mm spacers all-round as i needed to clear the front locking nuts on the coilovers. excuse the dirt:
they look nice mate, were they a lot better then standard? how hard did they feel?
paul-murphys
efr 6758 here i come
yes sir i am
tryin to see what people think of them? would only want to go maybe 20mm lower only.
tryin to see what people think of them? would only want to go maybe 20mm lower only.
my coilovers were a LOT better than standard..im back to standard height now and it feels like driving a boat compared..
Punchit - the bolts came with the spacers so not a clue. PM Jimski, as he bought em off me and could probly measure em for you.
Punchit - the bolts came with the spacers so not a clue. PM Jimski, as he bought em off me and could probly measure em for you.
I wouldn't dispute that and never do, what I do question is that you get a better drive/ride and don't just end up with a load of adjustment you are ill informed to set up, or that will just corrode and be unusable over time. A spring / damper option is likely to offer far greater compliance, stability and ride than coilovers set up by Joe Public, particularly on public roads.
Just measured one of the nuts and it seem the thread is 22mm long. So if i get me some 10 mm spacers i will need 33mm thread on the new nuts is this correct?
Hi all i fitted my coilovers yesterday and WOW what a difference to the handling it has made in a positive way. The car feels much more glued to the road and the ride quality is near enough the same as just having lowering springs.
It was very easy doing the rears but the fronts were more time consuming but i did it with the help of my good friend who is a mechanic. Im so happy with them cheers all for the posts.
It was very easy doing the rears but the fronts were more time consuming but i did it with the help of my good friend who is a mechanic. Im so happy with them cheers all for the posts.
Similar threads
