how many bhp has your cupra 180 got??
- Thread starter vee_dub_modder
- Start date
Have you got the part numbers?? I found a nice kit with floating rotors but some nice shiny porsch 996 ones would be unber cool 
hoping to be ablt to pick a pair up for under £400 off fleabay
hoping to be ablt to pick a pair up for under £400 off fleabay
jamiebennett81
Guest
hey guys, i recently bhought a 180bhp leon and want to sort out all the easyest mods before i get it remapped, to get the most power out of it. thinking something like 230bhp.
What mods to shop?
4bar fpr
3" maf house?
exhaust
fmic
i got a set of 225 BAM injectors, do these fit and can it be run along with a k03s?
What mods to shop?
4bar fpr
3" maf house?
exhaust
fmic
i got a set of 225 BAM injectors, do these fit and can it be run along with a k03s?
jamiebennett81
Guest
you dont need to change the MAF housing, FPR (dependant on mapper) or the injectors for just a stg2 k03s
injectors and MAF typically only needed to be changed when going k03 hybrid or bigger
Exhaust and FMIC is a must though
Got 232 BHP from mine,thats just a blueflame turbo back exhaust,green cotton panel filter,smoothed airbox,forge DV and a P-Torque re-map
Got 232 BHP from mine,thats just a blueflame turbo back exhaust,green cotton panel filter,smoothed airbox,forge DV and a P-Torque re-map
what is your boost set to?
how many psi peak, and holding?
Hi mate am not able to alter boost,and don't have gauges so couldn't tell you what psi i'm getting sorry
I read that the leon 180 can go to a max of 300BHP before replacing internals and rebuilding the bottom end, mine is bout 200BHP at the moment, just waitin for my FMIC, hoses and get a remap.... hopefully i will get around 240BHP along with my other mods.
jamiebennett81
Guest
jamiebennett81
Guest
i'll give it a go lol.... i'll see how next weeks work goes first... k03s hybrid and water meth to follow
My 2002 Cupra 180 runs 222/254 with shielded cone filter, custom 3"decat/2.5" catback, stock side mount IC and custom Stage 2 remap. Still think theres a little room for improvement. Once the FMIC is fitted after new year ill get her back on the dyno and tweaked
Im driving around with 261BHP/395Nm (or 291LB)
Mapped with BP Ultimate RON98
20130616_JD_STage2_BPUltimate_r324932 by ND-Photo.nl, on Flickr
Mapped with BP Ultimate RON98 + Bio ethanol
20130616_JD_STage2_E85_r32493 by ND-Photo.nl, on Flickr
Mods:
-3" Toyosports downpipe modded with Magnaflow 200CPI sportscat
-2.5" Cobra Resonated catback
-Custom FMIC
-Toyosports FMIC piping
-Forge 006 yellow spring + 1 shim (in BOV mode)
-Creations Motorsport coldside DV kit
-NGK BKR7E sparks
-Kendall 5W50 Fully synthetic oil
-N249/N112 mod
-SFS Big Bore TIP
-Blox Velocity Stack airfilter
-Ltec Secondairy fuel pump
-4 BAR FPR
-BAM Racing Phenolic intake spacer
-Mapped out the MAF
And then there's the uprated brakes, suspension, etc. Car is mapped by JD Engineering in Holland.
Mapped with BP Ultimate RON98
20130616_JD_STage2_BPUltimate_r324932 by ND-Photo.nl, on FlickrMapped with BP Ultimate RON98 + Bio ethanol
20130616_JD_STage2_E85_r32493 by ND-Photo.nl, on FlickrMods:
-3" Toyosports downpipe modded with Magnaflow 200CPI sportscat
-2.5" Cobra Resonated catback
-Custom FMIC
-Toyosports FMIC piping
-Forge 006 yellow spring + 1 shim (in BOV mode)
-Creations Motorsport coldside DV kit
-NGK BKR7E sparks
-Kendall 5W50 Fully synthetic oil
-N249/N112 mod
-SFS Big Bore TIP
-Blox Velocity Stack airfilter
-Ltec Secondairy fuel pump
-4 BAR FPR
-BAM Racing Phenolic intake spacer
-Mapped out the MAF
And then there's the uprated brakes, suspension, etc. Car is mapped by JD Engineering in Holland.
Last edited:
Similar threads
