Coolant Temp Sensor problems

[Mr Az]

Hey guys, hope someone on here can help me! Just after xmas my engine warning light came on, and after a Vagcom check I had the failed coolant temp sensor failure code. Anyway i was hoping if someone could tell me if this was something that could be done at home, or if it needs to be done by a professional. I've been quoted around £50 for parts and fitting, and i know that dosnt sound too bad but if i could get the parts and do it myself I would be happier.

Anyone got a walkthrough or could talk me through it?

BTW its a 2001 AUQ leon cupra!

 

[skahigh]

Mate, it is incredibly easy. It's pull out a clip, pull out the sensor, insert new sensor and reinsert clip. All done immediately after lifting the bonnet and removing the engine cover.

 

[mattgcupra]

If engine is hot then make sure you release the pressure from the coolant system by taking the cap of the expansion tank before removing the faulty sensor. I'm sure that there are people who have been quite badly burnt doing this.

Matt

 

[skahigh]

I think the sensor cost me about £25 so £25 for labour which is an absolute joke.

 

[LEE69]

£10 on ebay mine cost, new seal and clip

 

[Lee M]

Hey guys, hope someone on here can help me! Just after xmas my engine warning light came on, and after a Vagcom check I had the failed coolant temp sensor failure code. Anyway i was hoping if someone could tell me if this was something that could be done at home, or if it needs to be done by a professional. I've been quoted around £50 for parts and fitting, and i know that dosnt sound too bad but if i could get the parts and do it myself I would be happier.

Anyone got a walkthrough or could talk me through it?

BTW its a 2001 AUQ leon cupra!

Really Easy mate,

Took me 5 mins with the engine cold. Make sure you get a new 'O' ring seal too.

Rung Vag com after the installation, and clear your old codes too.



Cheers

Lee

 

[traumapat]

If engine is hot then make sure you release the pressure from the coolant system by taking the cap of the expansion tank before removing the faulty sensor. I'm sure that there are people who have been quite badly burnt doing this.

Matt

good advice. preferbly leave over night.

 

[Mr Az]

Thanks allot guys, SCN is always good for the info will order the new parts in the morning!

 

[BW 540]

£10 on ebay mine cost, new seal and clip

Could'nt believe that when i looked on ebay tonight, Went to local seat dealer yeterday and it cost me £25 aswell. Still can't believe they charge that much to fit one aswell.

 

[seremotors]

Just remember there are 2 types of sensor. Early models (2000-2001) used a dark green square 4-pin plug, the rest have a bright green oval plug with smaller pins

 

[richybigman]

Mine came up with the same fault tonight, does anyone have a pic of where to find this sensor (2005 LCR)?
Cheers

 

[richybigman]

Can anyone tell me where this sensor is please?

 

[LEE69]

Take of the two plastic engine coves and it is to the right of the head, as you look in the engine bay you can't miss it.

 

[traumapat]

http://www.seatcupra.net/forums/showthread.php?t=174095&highlight=coolant+temp+location&page=2

post 29.

its passenger side of engine

 

[richybigman]

Thanks for that, i'll have a look later.