Probee's GT2871R LCR

[DPJ]

What are you running now with regards to the mbc? I take you're talking about the deviation error when you say there's less tolerance? How far have you managed to push yours Dave?

I had to go back and have a look at logs then. Actually, Stage 3 on HB9 is requesting 2400 so it's not a long way to the map sensor limit from there, obviously less than allowed deviation. My mbc is set for 1.5 bar of boost all the way to the red line.

The Mafs I've had from Euro have always been better packaged (protected) than the ones I've had from dealers.

 

[probee]

I had to go back and have a look at logs then. Actually, Stage 3 on HB9 is requesting 2400 so it's not a long way to the map sensor limit from there, obviously less than allowed deviation. My mbc is set for 1.5 bar of boost all the way to the red line.

The Mafs I've had from Euro have always been better packaged (protected) than the ones I've had from dealers.

ok thanks Dave ill bear that in mind if i start to raise the boost with an mbc.

we're off out for a meal now and the Mrs has agreed to hold the laptop while i do some logs hehe

 

[DPJ]

ok thanks Dave ill bear that in mind if i start to raise the boost with an mbc.

we're off out for a meal now and the Mrs has agreed to hold the laptop while i do some logs hehe

You work the laptop and get her to drive!

 

[Skorchio]

Wow.. to get her to help you out you need to take her out for dinner!!! Nice....

 

[probee]

You work the laptop and get her to drive!

lol remind me not to take any notice of you

she thinks its a tank anyway mate, if its not a porsche its no good... little does she know

Wow.. to get her to help you out you need to take her out for dinner!!! Nice....

i cant believe she offered Nick. theres normally groans if i give it any stick, i made it quite clear what we had to do and i almost fell over when OK fell out of her mouth
she great and lets me do everything i want so i shouldnt complain....... also she might be reading this


im not overly happy with tonights logs. i thought i would be much closer.

these are with a 71.5mm bore housing and wmi

Wednesday	18	March	2009	20:16:29						
1ML 906 032 A  		1.8l R4/5VT      01 0001								
										
	Group A:	'003				Group B:	'020			
		RPM	Mass Flow	Load	Ign. Timing		Idle Stabilization	Idle Stabilization	Idle Stabilization	Idle Stabilization
	TIME					TIME				
MARKER	STAMP	 /min	 g/s	%	 °BTDC	STAMP	 CF	 CF	 CF	 CF
	4.54	2960	38.06	18.4	33.8	4.94	0	0	0	0
	5.34	3080	34.97	17.6	35.3	5.73	0	0	0	0
	6.13	3240	39.42	18.8	35.3	6.55	0	0	0	0
	6.95	3360	43.78	19.6	35.3	7.35	0	0	0	0
	7.75	3480	45.36	20.8	34.5	8.15	0	0	0	0
	8.55	3720	131.06	94.5	24	8.95	0	0	0	0
	9.37	4280	190.11	100	12	9.77	0	0	0	0
	10.17	4840	207.36	100	12	10.57	0	0	3	0
	10.97	5360	231.39	99.6	12.8	11.37	0	0	3	0
	11.78	5800	236.31	100	12.8	12.18	0	0	2.3	0
	12.58	6200	237.78	99.6	9.8	13	0	0	2.3	0
	13.38	6560	236.67	99.6	10.5	13.8	0	0	1.5	3

Wednesday	18	March	2009	20:14:53				
1ML 906 032 A  		1.8l R4/5VT      01 0001						

	Group A:	'002				Group B:	'031	
		RPM	Load	Inj. On Time	Mass Flow		Lambda Factor	Lambda Factor
	TIME					TIME		
MARKER	STAMP	 /min	%	 ms	 g/s	STAMP		
	14.64	3080	75.2	6.12	44.25	14.22	0.977	0.977
	15.44	3280	76.7	6.12	48.75	15.04	0.984	0.984
	16.24	3480	97	8.16	70.06	15.84	0.984	0.984
	17.04	3920	191.7	17	192.67	16.64	0.844	0.953
	17.85	4520	191.7	18.36	188.78	17.45	0.867	0.883
	18.65	5080	191.7	18.36	220.11	18.25	0.86	0.86
	19.45	5560	191.7	17.34	226.14	19.05	0.852	0.86
	20.27	6000	191.7	16.32	231.92	19.85	0.852	0.86
	21.07	6360	191.7	15.3	240.39	20.67	0.821	0.86
	21.88	6680	172.9	13.94	239.64	21.47	0.86	0.86

long term trim of -4.3


i dont think there is anything i can do until next month now. ill take it with me and hope tomorrow but i dont think he'll have time.

it didnt feel as quick tonight but i did have a passenger

 

[Skorchio]

You saying shes heavier than me? Thats not nice

 

[probee]

Went out for a meal last night and collected a badger

I now have medalions of badger hanging from every sharp part underneath and badger parts in the engine bay hehe

Nick are you coming over to clean it?

 

[Skorchio]

Hey may iw as going to post in here to day to see how you was getting on... No im not goign to clean it.. Althoug are we still on for sat?

Also do you know any dent people as i cant get hold of this guy i used to use..... Need to get it done this sat if not ill try do it myself..

EDIT

NVM found him number.. GOt to love GOogle! ANd and stcky shift key! lol

 

[Riko]

Damn! Did it cause any damage to the car??!

 

[probee]

No mate, car is good. It must be the strongest LCR splitter around

Clean up starts tomorrow

 

[UncleFester]

Hey may iw as going to post in here to day to see how you was getting on... No im not goign to clean it.. Althoug are we still on for sat?

Also do you know any dent people as i cant get hold of this guy i used to use..... Need to get it done this sat if not ill try do it myself..

EDIT

NVM found him number.. GOt to love GOogle! ANd and stcky shift key! lol

Since you finally got it on with that lovely woman, your typing has been worse than ever FFS get some sleep and stay off the redbull and blue pills

 

[jonjay]

No mate, car is good. It must be the strongest LCR splitter around

Clean up starts tomorrow

Same here

Is there any area to clean the car when your there? Not that it will matter due to the rain

 

[Skorchio]

AARRONNNNN we need to sort PADS!

 

[probee]

AARRONNNNNN has had the busiest week ever. 16 hour day yesterday!!

we'll go and buy something on saturday mate.

 

[probee]

Same here

Is there any area to clean the car when your there? Not that it will matter due to the rain

you can clean it there Maz, there is water available too. im not sure it is raining. ive seen sun in the forcasts

 

[probee]

http://www.metcheck.com/V40/UK/FREE/dayforecast.asp?zipcode=nn297ax&day=2

 

[jonjay]

you can clean it there Maz, there is water available too. im not sure it is raining. ive seen sun in the forcasts

Better bring my buckets with me then hehe!

 

[Skorchio]

shall i get to urs tehm for 10 ish? My dent apoint ment is 9 so not sure exaxt time ill be at urs!!!

 

[probee]

ring me matey... i did return your call yesterday

 

[Skorchio]

ye i know mate ill call you l8r (K)