CupraR210DJM's Black Leon Cupra R Detail

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
CupraR210DJM contacted me after seeing the results from Soundwaves detail a month and a half ago. Deano stated that his paint needed correction as the previous owner neglected this beautiful car and there was only so much he could do by hand. Since I done my last detail I was confident that I could bring back the black paint to its former glory stating that we would get a deep “slimy” black look.

As it is November we both knew time was against us so we agreed a day whereby we could start early and work till night fell upon us. Due to this time constraint certain pictures could not be taken to show the truly some truly stunning results.

Morning
I arrived at Deans house 9am and took some before pictures.

IMAGE_063.jpg


IMAGE_064.jpg


IMAGE_065.jpg


IMAGE_066.jpg


IMAGE_068.jpg


IMAGE_069.jpg



Products

Wash n Drying
Meguairs NXT Tech Shampoo
Meguairs All Purpose Cleaner
Sonus Drying Towels
Meguairs Microfiber Clothes

Body Work
Cleanyourcar fine polyclay
Meguairs Last Touch quick detailer
Menzerna Intensive Polish 85RD3.02
Menzerna Final Finish (PO 106 FA)

Sealants
Klasse All in One

Plastics, Rubbers and Glass
Autoglym Vinyl & Rubber Care
Chemical Guys - New Look Trim Gel
Turtlewax Glass Cleaner

Tools
Meguiars G220 mk2 machine polisher
Karcher Pressure washer
Snow foam Lance
Myriad of foam applicators
Menzerna Compound Pad (White)
Swissvax Detail Brushes
Meguiars Wheel Spoke Brush
3M 3434 Masking Tape
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Wheels

As always I cleaned the wheels first. I agreed with Dean that we would cleaned them thoroughly and clay them after to make sure they are in decent condition until they get refurbed. I opted to use Megs APC at a dilution ration of around 4:1. Once the APC was worked in I then proceeded to wash wheel sheep wool mitt. Dean then clayed the wheels after whilst I concentrated on the paint work.

IMAGE_070.jpg


IMAGE_071.jpg


Once the wheels where cleaned I sprayed on the Snow foam to loosen the dirt before cleaning. Essential to do this to avoid causing any more swirls when washing.

IMAGE_072.jpg


IMAGE_075.jpg


Rubber seals were cleaned with Megs APC. I stress the importance of this step as rubber seals and plastics tend to hold a lot of dirt which rub off onto the mitt and could cause more swirls! No pictures were taken unfortunately to show how much dirt came off!

Car was then washed with Meguairs NXT Gen shampoo.

IMAGE_076.jpg


Car was looking pretty clean and showing good reflections - good sign that the car is being looked after despite there being swirls. I must state the paint work was silky smooth so credit again to Dean as this definitely made my life easier claying the car 3 months before.

2008_1112leon0001.jpg


2008_1112leon0003.jpg



I clayed the car as a precaution to ensure when machine polishing we got the best possible finish.

2008_1112leon0004.jpg


Drying the car

2008_1112leon0005.jpg
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
The car looked pretty clean at this point however the swirls showed up in all their glory under the sunlight.

2008_1112leon0006.jpg


2008_1112leon0007.jpg


2008_1112leon0008.jpg


2008_1112leon0009.jpg


Halogen lights where setup and upon inspection the swirls looked very light. I opted for the Menzerna 106FA on a compound pad.

2008_1112leon0014.jpg


Results of bonnet
2008_1112leon0012.jpg


2008_1112leon0016.jpg


2008_1112leon0017.jpg


Left Wheel Arch

Before
2008_1112leon0019.jpg


After
2008_1112leon0021.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Left Front Door

Before
2008_1112leon0011.jpg


After
2008_1112leon0022.jpg


Left Rear Door

Before
2008_1112leon0023.jpg


After
2008_1112leon0029.jpg


Left Rear Arch

Before
2008_1112leon0027.jpg


After
2008_1112leon0031.jpg


Boot -sorry for poor picture of the after. We forgot to take one until the end!

Before
2008_1112leon0034.jpg


After
2008_1112leon0058.jpg


Right Front Arch

Before
2008_1112leon0044.jpg


After
2008_1112leon0046.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Results of the detail

2008_1112leon0042.jpg


2008_1112leon0043.jpg


2008_1112leon0050.jpg


2008_1112leon0052.jpg


2008_1112leon0053.jpg


2008_1112leon0056.jpg


2008_1112leon0057.jpg



MASSIVE Thank you to CupraR210,DJM for doing a superb job of cleaning the inside of the car whilst I was working on the outside. The inside was treated with Autoglym products and glass cleaned with Turtlewax Glass Cleaner. The inside really did look immaculate! Also big thank you for Deano giving me the opportunity to clean his car and get it back up to scratch.
 
Last edited:
Feb 8, 2008
426
0
Essex
Hey hey, thats my clean baby.
The results are fantastic and i am so pleased with the work you done on my paintwork. Cheers again, i have taken some more pics in the daylight to so just how good she looks. I'll post them as soon as i can.
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Hey hey, thats my clean baby.
The results are fantastic and i am so pleased with the work you done on my paintwork. Cheers again, i have taken some more pics in the daylight to so just how good she looks. I'll post them as soon as i can.
Welcome deano, anytime! :)
 
Feb 8, 2008
426
0
Essex
haha, anytime............
I'll defo be getting you to come over in the summer to do the top up protection detail we were discussing. But defo when its abit warmer and light past 4.30pm.

Deano........
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Yea course Ben :) I like challenges and I am sure I can your your car to its former banana glory hehe
 
Feb 8, 2008
426
0
Essex
Jonjay= I am pretty pleased with it. I do think with more time I would have got better results.

Sounds like a challenge for the summer me thinks, haha.
 
Genuine SEAT Parts and Accessories.