lcr wheel spacers???

[richybigman]

I’m interested in getting some for the rear too, but where do you get the longer bolts from?

I will need to know this too, also 2 longer locking wheel bolts

 

[Empi5]

Again Bill sells them, but think hes away at the moment, Also, ive sacrificed locking bolts, unless Halfrauds sell em,


Again, the bolts i bought, had to be sent to the machinists to make the thread a perfect fit, As you can imagine it was a total nightmare, It would be good if someone could post up details of their spacers and bolts that were fitted without problem and where they bought they from.

 

[LeedsLeon]

Has anyone ever noticed their car lean more in corners with spacers? I put them on an old escort once over and it seemed to give more body roll with the extra width making the leverage on the suspension longer. Therfore it always put me off puttin them on cars since.

I might have been completely wrong though and would love to put some on my Leon as it looks great!

 

[jamie paton]

well skidz have just ordered mine. 10mm front and 15mm rear H+R hubcentric spacers with longer wheel nuts and longer locking nuts as well. plus some nice new r32 "omanyt" replicas in eighteen inch. yeehah can't wait to see them all on.

 

[Andi]

I have the H&R 15mm spacers on the rear, i wouldnt put any on the front as it may hinder handling and tramline is its effectivly changing the offset !?

I did it for cosmetic reasons (it looks phat) at the same time i fitted the coilovers.

 

[richybigman]

How much were the spacers and bolts?

 

[Empi5]

well skidz have just ordered mine. 10mm front and15mm rear H+R hubcentric spacers with longer wheel nuts and longer locking nuts as well. plus some nice new r32 "omnyt" replicas in eighteen inch. yeehah can't wait to see them all on.

excellent, let us know as soon as they are on, with pictures.

 

[jamie paton]

140 for the four spacers mate, and skidz gave me the locking nuts and longer bolts for nothing, but they reckon they cost about £1.50 per bolt. andi everyone else recomends 10mm at the front but i've no choice cos i'm replacing the standard alloys and need the spacer to clear the brembo's anyhoo. i would love to fit coilovers as well but that will probably have to wait till next year.

 

[richybigman]

Make sure you do before and after pics
When do you think you'll be getting them?

 

[jamie paton]

two weeks today mate. 14th july

 

[Rikko]

Any updates on this as this has interested me quite abit ppl recommending 10mm on front and 15mm on rear does it make the car handle any better clearly it makes the car look fatter but anything else also where have ppl purchased the longer bolts and locking bolts from.

Rikko

 

[speedsix]

Surely it'd be an idea to bring the rears out to the same level as the fronts, anyone know the difference in track front to rear?

 

[George 3G]

Can anyone confirm for definite that 11mm Forge Hubcentric Spacers fit the rear hubs of a LCR ok? I've heard and read there may be an issue with the hub "lip"

Would be much appreciated

Thanks!

George