Hay lads in a bit of a hurry as av got work, but anyway I tried to fit a sony headunit today and yep I need to swap the wires round so it holds memory, What wires do I swap? as I dont have a red and yellow, the pin numbers would help a lot here. Also how do I get the pins out they seem to be dam near welded in. Any help much appreciated
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Ric 2001
Need an ID-ten-T form
Cant swap pins about, just swap the two bullet clips around, where did you get this headunit from. Should have come with the exact bit that that pdf had. Take a photo, look at the 2nd page of that pdf that was in the last thread.
yer but I dont know what the cables are that are in, Im seriously confused. Its a sony gt30rn headunit. I have the pins here or what they need to be for sony:
1-NC
2-NC
3-NC
4-Backup
5-Ant Rem
6-NC
7-ACC
8-GND
I have no idea what they are as default but apparantly they are wrong. And how do I change the wire from the plug do I swap the connectors in the plug round?
1-NC
2-NC
3-NC
4-Backup
5-Ant Rem
6-NC
7-ACC
8-GND
I have no idea what they are as default but apparantly they are wrong. And how do I change the wire from the plug do I swap the connectors in the plug round?
Last edited:
You should have an adapter for the Sony that will go between the wires from your car (the ones in your photo) into the back of the Sony. On THAT wiring loom there will be a red wire and yellow, with bullet connectors half way through. Just swap these round.
Have you got the wiring loom thats inbetween the car and head unit? You must do as youve got the head unit working in the forst pic
Have you got the wiring loom thats inbetween the car and head unit? You must do as youve got the head unit working in the forst pic
right anyway I need a wiring loom the back of the headunit has 2 ports which Im presuming if why they didnt provide one.
Will this work do you reckon?
http://cgi.ebay.co.uk/New-Sony-Ster...ryZ14932QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Will this work do you reckon?
http://cgi.ebay.co.uk/New-Sony-Ster...ryZ14932QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I just happen to have a Sony Headunit on my desk, as well as a digital camera, so I took some pics that might help you out!
This is my Sony Headunit, with the wiring loom attatched:
This is the wiring loom that went inbetween the Seat Block connectors and the Sony head unit:
All I did was replace the yellow and red wires like so:
And then plugged the block connectors into the corresponding Seat ones.
I hope this helps?
Btw, if your connecting an amplifier, use the blue one with white stripes (you can see it from my pics) as the remote wire.
This is my Sony Headunit, with the wiring loom attatched:
This is the wiring loom that went inbetween the Seat Block connectors and the Sony head unit:
All I did was replace the yellow and red wires like so:
And then plugged the block connectors into the corresponding Seat ones.
I hope this helps?
Btw, if your connecting an amplifier, use the blue one with white stripes (you can see it from my pics) as the remote wire.
Should help
All you need to do is swap 4 + 7 over. But you also need to make sure that 3 is disconnected. Make sure pin 1 is also disconnected if this is not compatible with your head unit.
I wouldn't butcher about with the factory connectors, it is possible to take the crimps out of them and reposition them but it involves the use of long pointy tweezers!
The ebay link doesn't look suitable for your application at all. What you need is a PC2-69-4 http://thebassbin.co.uk/shop/product/products_id/3082.html which will also be available from halfords...
You might also need a PC5-52 if your radio reception sucks. http://www.autoleads.co.uk/database/productImages/PC5-52.jpg
This is required to power the antenna amplifier which is located in the base of the antenna.
Looking at the manual for his he has iso blocks in the back of the HU so it deosn't come with a loom. Thats why the ebay link wasn't much use!
m
Similar threads
