i have a turbosmart dual port and that chatters when changing gears? this has got me worried now?
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Split-R Valve
- Thread starter richybigman
- Start date
i have a turbosmart dual port and that chatters when changing gears? this has got me worried now?
I think it is the BMC as well mate, unless the valve if faulty some how
I don't have a BMC any more so I can not check for you mate, but I get a really nice whooosh
noise from mine very happy.I went for a long drive last night to brake the valve in abit and it seems to be louder today when I went out again which is cool.
but I get a really nice whooosh
I went for a long drive last night to brake the valve in abit and it seems to be louder today when I went out again which is cool.
iv got a bmc on with the split r. i dont think its that loud cant really hear it in 1st or 6th, the other gears i can jsut about hear it. think i need to find some1 with the slpiter r on and see what theres sound like.
Don't know mate
Even with a standard LCR you should get some thing like with the 007P.
I get a very nice whoosh all through my gears, like with my old 007P has got abit louder as the valve is started to settle in abit.
I'm waiting for the new one to come through, Forge were expecting a batch today so hopefully i will get it next week.
Don't know mate
Even with a standard LCR you should get some thing like with the 007P.
I get a very nice whoosh all through my gears, like with my old 007P has got abit louder as the valve is started to settle in abit.
think its got abit louder to day, i'll just have to see in a few weeks time. can hear it in the car with no music on but just dont know what it sounds like out side of the car.
no didnt get a replacement, think it sounds ok now. still ant as loud as i thought it would be tho
No i haven't got it yet, i was thinking of relocating the valve to the front by cutting into the upper intercooler hose. do you think it would be worth it? I've got most the bits already except the super flex hose.
Richy, I had bad experiences with relocating the valve to the front, but you might have better experiences. I got 100% MORE flutter....
The closer to the turbo the dv is, the hotter the air is, and the hotter the valve gets.
Using cooler air is supposed to give a better response, but it didn't for me.
Using cooler air is supposed to give a better response, but it didn't for me.
I've had a listen to the sound clip and that is definitely wategate chatter. I had it a couple of months back when my baileys valve started to fail.
Run it like this at your own risk, but i would suggest fine tuning it better to stop you from getting this noise.
I think the noise is better with just a forge 007 and BMC
Run it like this at your own risk, but i would suggest fine tuning it better to stop you from getting this noise.
I think the noise is better with just a forge 007 and BMC
Last edited:
With a Forge 007P and BMC mine was very quiet. With a Bailey DV30 and open cone filter it was significantly louder.
Out of interest, yesterday I removed the SPLIT-R and put my DV30 back in. Zero chatter with the DV30 (I get a very small chatter on half boost gear changes with the SP-R, none at low boost and none at full boost), car felt the same to drive, valve response felt similar, the SPLIT-R is definately a bit louder but not by a huge amount.
Out of interest, yesterday I removed the SPLIT-R and put my DV30 back in. Zero chatter with the DV30 (I get a very small chatter on half boost gear changes with the SP-R, none at low boost and none at full boost), car felt the same to drive, valve response felt similar, the SPLIT-R is definately a bit louder but not by a huge amount.
Similar threads
