What boost is everyone running?

[mattbolt]

What boost are you all running (PSI) with what mods?

Fitted my boost guage the other day (to the top of the recirc valve) and been getting 10 psi just normal driving and then 19psi - 20psi when putting my foot down.

Seems like quite alot to me ? (Considering my mods)

 

[R953 VSE]

around 19-20 psi aswell with revo stage 1.

what mods have you done to achieve 220bhp?

 

[mattbolt]

simply a recric valve and a remap mate its 220 at the fly.

 

[R953 VSE]

have you had it RR'd to confirm the power? no chance of 220bhp at the fly with only a remap i don't think.

 

[Arwel]

Im running standard boost with a milltek cat back, forge fmic and green cotton filter. Normally hits 6-7 and holds for a while. Foot to the floor in 3rd recently has seen it nearly reaching 10psi though.. strange?? or is it normal?

 

[carlisle pete]

mine was remapped till last week! was hitting 19psi but ocassionally 20-21 psi! but i dont no as my cars still at jabba now!!

 

[PhilW]

Spikes at just over 22psi. Revo stage 2 and all the mods..

 

[Smoki333]

Boost to 9 psi and holds. Not sure what map Defo mapped though

 

[ibizacupra]

32psi



BANG!
not yet....

 

[Bogwoppit]

My car is completely standard bar a jabbasport remap, here is my boost graph. My Autometer boost gauge reads slightly higher than this.

 

[nick s]

was running 27psi on a K03s but that went bang and i'm now spiking about 19-20psi. but i'm going to wind the actuator out a bit more to get around 22-23psi as i have just changed from Forge back to standard

 

[traumapat]

18psi approx

 

[turboboy]

dont know wat psi 1.9 bar is!

 

[acidstrato]

27psi^^^^


as wih most of the other revo abusers, between 21-23psi spike throughout the gears

 

[traumapat]

dont know wat psi 1.9 bar is!

alot! 28psi i think

 

[P-torque.co.uk]

These are some high figures!

18psi overboost and 13/14 psi constant is our standard mapping.

 

[truCido]

Boost to 9 psi and holds. Not sure what map Defo mapped though

something bit weird there then if its mapped!!

 

[P-torque.co.uk]

Boost to 9 psi and holds. Not sure what map Defo mapped though

If that boost is correct, then you have a problem somewhere.

You should be boosting twice that, then dropping

 

[__B3NNY__]

Spiking at approx 21/23 psi with my mods, have to change my boost gauge tho to a 30 psi as i got a 2nd hand 20psi by accident, It off the scale now quite amusing to watch!

David.

 

[truCido]

Mine spikes at about 22psi