What would you estimate, bhp ???

[Mattman]

if i was to do the following mods to my ibiza ??

Ko3s turbo
miltec turbo back exhaust ( already fitted )
4bar fpr
apr or revo remap ( already got apr but would do again )

i know it would only be a rough idea - just trying to see if its worth the cost
or save for ihi ???
thanks
matt

 

[Martyn]

230/240 Depending on where you get it RR'd

 

[Mattman]

it would be awesome gti or dubsport i think, there the nearest to me. ??

 

[AlphaMale]

Might want to add a FMIC to get that figure though.

Same as what I will be doing.

Alpha

 

[Ant FR]

230/240 Depending on where you get it RR'd

joking aer'nt ya,

If you are gonna be popping on the above spec, you will at least need the FMIC and Downpipe and Cat to get 230 and above. personally i would spend money first on the intercooler and downpipe, then finich it off afterwards.

 

[Martyn]

Ooops, didnt notice the the FMIC wasnt on the list

The guy says he has a 'turbo back' Milltek which to me would include the downpipe....

 

[AlphaMale]

Sounds a bit like Mk4Polo's Cupra.

Think he had over 240bhp from a similar spec

Remember that power is sustained for longer and you should see a high torque figure too

Alpha

 

[acidstrato]

joking aer'nt ya,

If you are gonna be popping on the above spec, you will at least need the FMIC and Downpipe and Cat to get 230 and above. personally i would spend money first on the intercooler and downpipe, then finich it off afterwards.

no more optimistic than u sorry

and turbo back exhaust would include a dp an cat.....

 

[Ant FR]

no more optimistic than u sorry

and turbo back exhaust would include a dp an cat.....

What do you mean no more optimistic than me,

 

[Mattman]

yeah got the miltec cat / downpipe.... so add a fmic to the list and im looking at 230 ish
mmmmm sounds good to me......

 

[PhilW]

With mods you lookin at around 240 i reckon, barring any possible problems.

Rough costs...


Ko3s - 250-500 quid
4 bar - 40 quid
arounf 600 notes for a remap for the suitable mods, i.e stage 2 revo.

 

[Mattman]

so with any luck i should be able to do it for 1500 quid ish with an intercooler.

is it poss / worth going the ko4 route or is that a lot more involved ??????

 

[pint_of_stella]

from what i've seen/heard you won't hit the 230's without getting the intercooler replaced - the stock one is just can't cope. Infact i'm sure you get boosting problems with the ko3s and stock intercooler don't you?

 

[acidstrato]

What do you mean no more optimistic than me,

well u seem like someone whos very into their RR results. going by ur sig anyway

i myself believe most figures are utter shite and only useful to seeing gains from mods if ur using the same rollers each time

just as martyn said
the end figure really depends on where you get it RR

 

[Myles]

dfgthgthtbvconnoroliviaik[i-i-[klo; yuioprt

 

[Ant FR]

well u seem like someone whos very into their RR results. going by ur sig anyway

i myself believe most figures are utter shite and only useful to seeing gains from mods if ur using the same rollers each time

just as martyn said
the end figure really depends on where you get it RR

who rattled your cage, did'nt know it was a mines bigger than yours contest

could'nt give a shite, yes i put my figures on my, sig so fecking what, so do most

i could go further and list my spark plug codes if yo want as well, Don't judge me as a person as you don't know me

And yes mine has only ever used one set of rollers from start to finish, originaly 145 bhp when new so my gains are comparable and i can see the differences as i go

 

[AlphaMale]

who rattled your cage, did'nt know it was a mines bigger than yours contest

could'nt give a shite, yes i put my figures on my, sig so fecking what, so do most

i could go further and list my spark plug codes if yo want as well, Don't judge me as a person as you don't know me

Easy Tiger! ... Nobody is having a go so peace out brother

Alpha

 

[acidstrato]

lol ok chill out, it was just my opinion

could argue further but i wont

 

[Ant FR]

best not to, i spend most of my time on here trying to help out others and give constructive posts.

Don't appreciate arsey posts, there is another seat site for that, and its not here!

 

[acidstrato]

LOL ok.......less than a year and u own the place!...constructive posts...yes i see