Things you buy when ur bladdered

[jetsetjimbo]

Looks like it's pretty easy to use and the range is fairly easy to get ones head around.

I've bought some poorboys bits and bobs and have been impressed with that.

The Klasse a.k.a Carlac or what ever it was called from carsparkle is supposed to be pretty good.

Iains also being raving about this Wolfgang sealant.

Just try not to buy it after you've had a couple

 

[Scotty_b]

Ive used megs swirl remover, pinnicles advance swirl remover and poorboys. None of them have got the swirls out of the LCR's paint, ive been told by a few people taht ghave tried that the paint is very hard so im going to try and get some Menza polish to get them out. Maybe worth ago a sthis stuff is supposed to be the dogs danglies!

 

[FinerDetails]

use the Advanced SR and a four inch cutting pad, that should sort them...

follow up with standard SR and a light cutting pad.... to totally remove.

 

[Scotty_b]

Thats what ive used bar the smaller cutter, do they make that much differnce over the 6inch?

 

[FinerDetails]

yes, lots..... they are far more precise and generate more heat and resistance....

 

[Empi5]

Right , ive done a deal with Autopia to try the following:

Sonus SwirlBuster Polish SON-450
Ultimate Paint Protection

Ive also got some Klasse AIO , and was wondering , after the swirlbusting polish, would a coat of Klasse, then the UPP be effective.

 

[Scotty_b]

Phil have you ordered it already? Was going to ask if you would mind getting me some pads and we could split the P+P?

 

[Empi5]

Phil have you ordered it already? Was going to ask if you would mind getting me some pads and we could split the P+P?

Hey Up fella, tell me what you want, cause some of my order is on back order and not yet been processed.

This is my order so far:



Sonus SFX-2 Spot Pad SON-SFX-2SP 1 5.99
Sonus SFX-3 Spot Pad SON-SFX-3SP 1 5.99
3.5" Dual-Action Spot Pad Backing Plate 43-085DA 1 11.99
Klasse Car Wax & Clay Bundle TPS-KLS-CLY 1 27.95
Sonus SwirlBuster Polish SON-450 1 24.95
Blue Perl Microfiber Applicators MF-APP-2 1 3.99
Sonus SwirlBuster Foam Polishing Pad SON-SBFPP 1 14.95
Ultimate Paint Protection FS-UPP16 1 22.99

Let me know what you want and i will happily add to it

 

[Scotty_b]

Sonus SFX-2 Spot Pad SON-SFX-2SP 1 5.99
Sonus SFX-3 Spot Pad SON-SFX-3SP 1 5.99
3.5" Dual-Action Spot Pad Backing Plate 43-085DA 1 11.99

Think its these im after? Not sure i want the 6 inch pads but not sure if they do them. Let me have a look on autopia and get back to you.

Cheers fella

 

[jetsetjimbo]

This has ended up as a pretty expensive drunken purchase.

 

[Scotty_b]

SON-DASFP-6 $18.99 backing plate
SON-SFX-1FP $11.99 x2 swirl pads
MEG-X-2000 $9.99 drying towl
303-30340 $14.99 great mat plastic cleaner (try some!)

Not sure whether to get the 3 inch pads or not?

Have to let me know how much i owe you inc p+p and then we can sort out cheque, cash, bank transfer etc

 

[Empi5]

All done fella, will let u know shortly.

 

[Scotty_b]

Cheers you have a pm!

 

[Empi5]

Cheers you have a pm!

No probs mate, the yanks are in bed at the moment, i will let you know when i get an email back to confirm all is ok.

 

[Scotty_b]

Great fella, did you use the discount codes too?

 

[Empi5]

Great fella, did you use the discount codes too?

YEP.... 15% discount on everything ( I hope )

 

[Scotty_b]

Thats what we like to here! Is the exchange rate still around 1.4 ish?

 

[Empi5]

Transformer

Will this be good enough, you wouldnt have to cut off the USA plug, am i right ?

http://cgi.ebay.co.uk/240V-TO-110V-...2QQihZ013QQcategoryZ96942QQrdZ1QQcmdZViewItem

Just read it again, its dependent on the wattage of the Porter Polisher

3.7 AMP whats that in English money !

 

[MarkE]

Will this be good enough, you wouldnt have to cut off the USA plug, am i right ?

http://cgi.ebay.co.uk/240V-TO-110V-...2QQihZ013QQcategoryZ96942QQrdZ1QQcmdZViewItem

Just read it again, its dependent on the wattage of the Porter Polisher

3.7 AMP whats that in English money !

The main cable on the polisher is pretty short so you'd also need a US extension or you'd be pulling on that transformer all the time. US plugs are a bit naff as well.

The PC is rated at 3.7A @ 120V, so approx 450W.

You could maybe get Votex to swap the plug over for you

 

[WeeJase]

just been checking my e-mails for invoices.i could have bought a anything last night. i was very very drunk.so drunk in fact i had complete strangers in my house watching the football.