Hello,
Early 2008 MK4 Ibiza FR TDI 130. 69,000 miles.
A few things on my car have been worrying me and I wondered if anyone could give me some advice.
The first thing is the turbo. It's mostly when cold such as in the mornings. But when I accelerate, at around 2000rpm there's a very high pitched noise. Although it is not very loud I notice it, and it seems to be more frequent over the last couple of months. It's very high pitched like metal on metal, not like the siren noise people complain about when a turbo on a diesel blows.
When in netural, there is a grinding noise, then when I put down the clutch this goes away. There is also a screaching when I pull away sometimes when cold. I thought this was the clutch release baring, but have been told that the flywheel is making the noise and that the noise when pulling away is engine mounts. Does that sound correct? I was recommended using a conversion kit for the dual mass flywheel to save costs, does anyone know much about these?
A bit P'd off as I thought these were higher mileage problems! I always make sure the car is warmed up (at 90C) before I put any real power and revs through the engine. Although when I first got it I was a newby so kept booting it at 2,000 rpm which can't be good!
Thanks for any help, much appreciated!
Early 2008 MK4 Ibiza FR TDI 130. 69,000 miles.
A few things on my car have been worrying me and I wondered if anyone could give me some advice.
The first thing is the turbo. It's mostly when cold such as in the mornings. But when I accelerate, at around 2000rpm there's a very high pitched noise. Although it is not very loud I notice it, and it seems to be more frequent over the last couple of months. It's very high pitched like metal on metal, not like the siren noise people complain about when a turbo on a diesel blows.
When in netural, there is a grinding noise, then when I put down the clutch this goes away. There is also a screaching when I pull away sometimes when cold. I thought this was the clutch release baring, but have been told that the flywheel is making the noise and that the noise when pulling away is engine mounts. Does that sound correct? I was recommended using a conversion kit for the dual mass flywheel to save costs, does anyone know much about these?
A bit P'd off as I thought these were higher mileage problems! I always make sure the car is warmed up (at 90C) before I put any real power and revs through the engine. Although when I first got it I was a newby so kept booting it at 2,000 rpm which can't be good!
Thanks for any help, much appreciated!