stop start doesnt work

[BigJase88]

I coded my stop start out

Worst system ever invented. At times down right dangerous

 

[Tell]

The

Hello,

I have "Power consumption too high" problem. Tried reseting settings of start stop to 7.6v - nothing happened. I have new VARTA AGM battery, thought it would fix the problem - nah. What else can I check? Could somebody, who's start stop working, show me other settings related to it? I would compare mine. I have access to OBD11 and ThinkDiag. Thank you

7.6 v feels about right. Ateca is that the Arona was 7.4 v or 7.8. On Obdeleven just make sure it changes to green after pressing accept that it accepts the change. Whilst the engine is cold, load high etc it might not work in any case. Like heavy A.C. will stop it.

Obdeleven settings are here:

OBDeleven Tool for VCDS type of activity... working ones for the Ateca

This thread covers the use of the OBDeleven tool with worked, tested results on the Ateca 2016 - 2019 models. Check Obdeleven website for news on programming the new 2020 models on progress of this "The programming temporarily is not supported on models that are manufactured from 2020 and have...

www.seatcupra.net

 

[RUM4MO]

Hello,

I have "Power consumption too high" problem. Tried reseting settings of start stop to 7.6v - nothing happened. I have new VARTA AGM battery, thought it would fix the problem - nah. What else can I check? Could somebody, who's start stop working, show me other settings related to it? I would compare mine. I have access to OBD11 and ThinkDiag. Thank you

Did you code the new battery to the car's battery management system, for example changed from EFB or Fleece to AGM and change the serial number to prompt the system to know that that battery had been replaced?