Show us your Boost Gauge installs!

[wazza16]

sweet, sounds gd to me haha did you have prosport gauges in yours??

 

[Damoegan]

Aye, ProSport boost & oil temp..

 

[wazza16]

kewl ye they are nice gauges eh, did you get the electrical boost gauge or mech? i was looking at the elec boost so they both have the opening calibration?

 

[Damoegan]

Both were electric

 

[wazza16]

ye sound man, where did you purchase them? im gonna go for the RGM double pod rather than the nomad pod not keen on the angle that it sits at! were ur gauges the peak ones? Cheers damoegan

 

[Damoegan]

Got them direct from ProSoprt mate.

 

[wazza16]

Nice one, i thot they were in america? cheers for the advice pal much appreciated!

 

[wazza16]

ooo wat the thread on the filter housing??

 

[Damoegan]

1/8npt iirc

 

[wazza16]

kewl, just the sender was 1/8npt so straight fit!! does your gauges sat prosport or motor meter on them??

 

[Damoegan]

Yea, straight fit..

They said ProSport IIRC.

 

[wazza16]

damogen, did u get the stepper motor series at 50 quid a gauge are did u get the light and beep series at 35 quid a gauge?

 

[Damoegan]

Premium gauges with stepper motor and peak warn light & beep...

Real nice gauges and would of went for them again for the ED30 but I want the gauge to match the clocks on the GTI so dont have much of a choice. Would love a DEFI Racer but they circa £150 each....

 

[wazza16]

ye tht the ones ive ordered!! ur golf is nice man!! and ordered rgm double A piller pod! will update wen installed!!

 

[RpR]

Just a small update, fitted the ProSport Premium gauges a few days back:

And two small vids can be found here:
http://www.youtube.com/watch?v=7qhsDOWrpp8
http://www.youtube.com/watch?v=HVghT4KHhuI

 

[marksy93]

ive got 3 gauges -

need to figure out how to link up the boost & vacuum gauge - any help? the volt gauge is working fine though

 

[hoggy a]

this be mine


boost gauge on tdi FR

is it a straight forward job fitting this onto a diesel,if so some advice would be great,also weres the pod from mate as this looks quality

 

[J44APX]

Drill into the intercooler pipe fit a ' nipple ' run your hose through to the cabin - wire your electrics into side lights job done

 

[Chriswaite130]

Drill into the intercooler pipe fit a ' nipple ' run your hose through to the cabin - wire your electrics into side lights job done

What about Oil Temp gauge how does that plumb in?

 

[J44APX]

If you look at the oil filter housing you will see a small allan grub screw on the top of it, remove that and screw the oil temp sender into it. Job done