Scottish Charity Rolling Road day (Ecotune, Hillington) # 4th May 2013 #

[Markyed30]

Diverter valve ur actuator is on the turbo time u sold up and sold me ur bits n bobs gr8 result !

 

[John Lindsay]

Couple of pics from me, sorry if the quality isn't the best, downloaded them straight from the camera to the iPad, can never quite make my mind up with the iPad display.

John

 

[Seatmann]

Is that like a fish eye lens you're using in some of those pics?

 

[Seatmann]

Did you Al stick the cupra on the rollers too? I seen you arrive as I was leaving.

 

[John Lindsay]

Is that like a fish eye lens you're using in some of those pics?

Not technically a fisheye, just quite wide angled.

 

[lawrieIbizaMk4]

Not technically a fisheye, just quite wide angled.

You get any of my completely standard boc john?

Ian came and picked the discs up from me, says thank you very much

 

[Seatmann]

Not technically a fisheye, just quite wide angled.

Cool, it makes the pics more interesting to me

 

[big eck]

Did you Al stick the cupra on the rollers too? I seen you arrive as I was leaving.

Als made 364bhp/331lbft, so he told me.

 

[WeeG]

I thought Als made 364bhp/331lbft???

ALS made 363 as well but his whp was 318. he's getting his map update today from revo

 

[WeeG]

Diverter valve ur actuator is on the turbo time u sold up and sold me ur bits n bobs ��gr8 result !

Sorry bud, been a looooong day lol

 

[John Lindsay]

You get any of my completely standard boc john?

This is all Lawrie, I was in Burger King by the time you were on the rollers

 

[John Lindsay]

Needs lowered... They both do!

 

[Al]

Mine was 363.7bhp and with 331ft-lbs.

Suspect a boost hose issue for actual boost not meeting requested boost for the numbers being a bit down. Seems my bum dyno is reasonably accurate. I only wish i had it done with all mods on and fitted correctly and not just some of them.

Will be spending time with Faisal from Konzept Autohaus today hopefully to check stuff over

Also thanks to all at the venue. they have a cery Good set up at Ecotune and Stan seems like a very accommodating and nice lad. And hats off to him for using his Saturday to put over a grand to charity

 

[McDubber1]

Had a good day yesterday and thanks to everyone who made it happen, it was well worth the drive through.

I was very pleased with my results on my A4 which made 305bhp & 323 ft lbs

 

[dougie84]

Mine made 282bhp needs a manifold to get the maximum out turbo

 

[GTJEDI]

Heres my print out,dunno if its readable.

196bhp max power

314.9 ft/lb torque

 

[Leesmith1]

Really good result for a diesel ! Hopefully have mine like that soon

 

[Neil82]

After replacing the actuator valve and running again the car put out some great results. Highest whp figures on a 2+ car on ecotune rollers at 325 whp

what did yours make at the wheels at Sitech?

 

[WeeG]

what did yours make at the wheels at Sitech?

346.9 at the wheels 386.4 at the flywheel and 343.4 lbs ft torque, with Boost 9, timing 6, fuel 5 and temperature at 5degrees