Ride hight? (not coilovers)

Olly20VT

Full Member
Jun 8, 2004
1,234
0
Stroud Glos ,England
Iv got seat sport kit on my car but i want it lower now. As iv got good dampers and i dont want to go to low im thinking of getting some springs, could people please post there hights and set up for me, iv taken the mesuermant as shown in pic, mine is 145mm from side skirt to floor.
Also a standard car hight would also be good as i dont think mine is far off that.



Thanks
Olly
 

CupraTgirl

Model Behaviour
Nov 8, 2002
2,468
0
England
Visit site
Hey Olly,

I dont know if these are the best pictures but i dont have many side on! My suspension is standard at the moment

DSC011761.jpg


DSC011641.jpg
 

CupraTgirl

Model Behaviour
Nov 8, 2002
2,468
0
England
Visit site
I know the pictures are small but you can save them and open them on your computer and they should come up bigger? If they dont give me a shout and i can send them via MSN or something? ;)
 

The_one

Full Member
Mar 18, 2006
508
0
England
I know your only trying to help but he wants the actual height from the skirts to the ground, not just pictures ;)

Olly mine is approx 135mm thats with standard wheels and suspension
 
Last edited:

CupraTgirl

Model Behaviour
Nov 8, 2002
2,468
0
England
Visit site
The_one said:
I know your only trying to help but he wants the actual height from the skirts to the ground, not just pictures ;)

Olly mine is approx 135mm thats with standard wheels and suspension

You may be right but he just set he wants peeps heights and set ups and no one else had replied so i did what i could and you can get a rough idea just from pictures until someone else had put up other results
 

Olly20VT

Full Member
Jun 8, 2004
1,234
0
Stroud Glos ,England
The_one said:
I know your only trying to help but he wants the actual height from the skirts to the ground, not just pictures ;)

Olly mine is approx 135mm thats with standard wheels and suspension


DOH that means mine is 10mm higher than standard :cry: but if you take in to acount tred depth and that its a hard thing to measure then they are about the same and not lower wich is what i am trying to answer, so now if anyone has lowering springs with pics and hights that would be good.
 
Nov 2, 2004
9,335
0
South Wales
I'm interested in this as well, been wonderin how low mine is compared to the known height of the H+R kit. Will measure mine tomorrow. :D
 

sirjimalot

JIM-MAN
Aug 10, 2005
534
0
County Durham
well i wasnt at first, but then it felt a bit crap and seemed to get worse, so i decided to get a kit.

and the fact that my car doesnt look lower doesnt really help and i often gt asked 'are you gtting it lowered then' and many like it, so coilovers it is
 

CupraTgirl

Model Behaviour
Nov 8, 2002
2,468
0
England
Visit site
sirjimalot said:
well i wasnt at first, but then it felt a bit crap and seemed to get worse, so i decided to get a kit.

and the fact that my car doesnt look lower doesnt really help and i often gt asked 'are you gtting it lowered then' and many like it, so coilovers it is

Yeah i think a full kit is probably the best way to go, after all the original dampers are only made to take the original springs so i suppose thats why it felt :censored: dont you think?
 
Nimbus hosting - Based solely in the UK.