Im not wanting to do any drilling until i no where exactly u put the hole!? Also do u just drill the hole with the whole pedal box still attached to the car??
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Pedal Box/Assembly (Again!!)
- Thread starter CraigW
- Start date
-
- Tags
- box or assembly pedal
Im not wanting to do any drilling until i no where exactly u put the hole!? Also do u just drill the hole with the whole pedal box still attached to the car??
Ah, found something a bit warmer - it's in the Mk3 section (but still no pics) (had been looking in the Mk2 and the guides section)
http://www.seatcupra.net/forums/showthread.php?t=114682&highlight=pedal+box
Last edited:
here's the thread from when my pedal box went.... http://www.seatcupra.net/forums/showthread.php?t=123151&highlight=battery
the thread title doesn't mention pedal boxes which is probably why you couldn't find it- maybe m0rk could change it?
the pics probably won't make much sense until you've had a look in the car.
hope it helps.
Rite got my car back and the pedal box had broken in a different place!! So the garage drilled a hole by the break and welded up the broken section and filled the hole full of weld!! I think it shud hold!!
I think it is rite now cos the pedal movement is so much easier than before and u need hardly any presure to move it now. Only problem is the biting point has moved lower :s Shud this get higher as the new clutch gets run in?? Hope it does cos u only have 2move the pedal up a about 5mm n ur at the bite.
I think it is rite now cos the pedal movement is so much easier than before and u need hardly any presure to move it now. Only problem is the biting point has moved lower :s Shud this get higher as the new clutch gets run in?? Hope it does cos u only have 2move the pedal up a about 5mm n ur at the bite.
So its been welding up again in a different place, and its got a hole in it that has also been welded lol... hope this guys a good welder..
Lets start a book.. i give it till August
a new clutch, it will be lower just need to get used to it and youll be fine
Lets start a book.. i give it till August
a new clutch, it will be lower just need to get used to it and youll be fine
So its been welding up again in a different place, and its got a hole in it that has also been welded lol... hope this guys a good welder..
Lets start a book.. i give it till August
a new clutch, it will be lower just need to get used to it and youll be fine
Nah i dont think so...... it is so much easier to move the pedal now. It aint as much of an effort and it aint as still!! Its so loose............... im 2used to a stiff clutch pedal!!
Well when i got home after picking my car up i had a look at the pedal box and honestly the garage have put s*** loads of weld along all the joins etc and in a drilled hole beside the broken bit. I honestly dont think it will snap again!
As some of you know my pedal box has broken again
It is going to be drilled and bolted now and hopefully that will be it fine!!
Just wondering shud i change the clutch cable?? Cos i dont know if it will release pressure on the joint or not. Just needing sum advice!!
It is going to be drilled and bolted now and hopefully that will be it fine!!
Just wondering shud i change the clutch cable?? Cos i dont know if it will release pressure on the joint or not. Just needing sum advice!!
tomprice
Guest
I had this problem a couple of weeks ago, i ended up taking the pedal off and getting a mate to bend the metal flap back down (luckily mine didnt snap off) and weld all the way around it rather than the two spots that were on it to start with. Just remember to take the bush out before you get it welded or it will melt (oops, my bad) i have ordered the bush three times and each time the useful people at Seat have sent me the wrong part, i have been in to order it today and still they dont understand what i need! if anyone knows of the part code that would be useful?
Similar threads
