First thing I did was to change the rear turnsignal lamp. Allways hated that yellow look. I bought the Osram Diadem Chrome P21W. A little bit better. I also the opportunity to change the backlight to a LED ive got from Amazon, Aglint W16W LED, works ok but had to change it to a LED lamb in
obdeleven otherwise it showed an error.
I have played with
obdeleven a little bit. Mods so far.
Fan speed on Auto mode
1. Select Control unit 08 (Air Condition)
2. Long
Coding
3. Name: Blower display in auto operation
4. Change value to "activated" [standards: "Not activated"]
Seat belt warning deactivation
1. Select Control unit 17 (Dash Board)
2. Security access > Access Code: 25327
3. Long
Coding
4. Name: Seat belt warning
5. Change value to "Off" [standard: "On"]
Missing tank liters [WORKING]
The same
coding can be obtained by spending 10 credits
1. Control Unit 17 (Dashboard)
2. Long
Coding
3. Byte 10
4. Enable Bit 4
Fan speed in automatic mode (Climatronic bi zone) [WORKING]
1. Control Unit 08 (Air Condition)
2. Long
Coding
3. Blower display in auto operation: change the value to "Activated"
HIGH BEAM ASSIST
CONTROL UNIT 09 – CENTRAL ELECTRICS
SECURITY CODE 31347
ADAPTATION
FERNLICHT_ASSISTENT
EXPANDED HIGH BEAM CONTROL -> HALOGEN HIGH BEAM ASSIST (yes, Kamiq has LED high beam, it doesn't matter) / AFS, FLA, FERNLICHT UBER AFS (for full led)
MENUESTERUNG FERNLICHTASSISTEN –> PRESENT
FERNLICHTASSISTEN RESET -> ACTIVE
MENUESTERUNG FERNLICHTASSISTEN WERKSEINSTELLUNG –> PRESENT
FERNLICHTASSISTEN_ZETVERZOEGENERUNGSWERT - 800 ms (keep the value)
Next
CONTROL UNIT A5 – DRIVER ASSISTANCE
Long
Coding:
AFS_CODING_LIGHT_ASSIST –> HIGH_BEAM_ASSIST
Reset multimedia unit (push the power button over 10 seconds to restart the unit)
Activate the Light Assist in Light Settings (multimedia unit)
Push the high beam lever to activate the Light Assist (high beam icon with A). To turn it off push and pull the lever or change the option in settings.
Virtual Cockpit Sport [WORKING]
1. Control Unit 17 (Dashboard)
2. Adaptation
3. Sport
4. Change the value to "Display" [Standard: "Don't Display"]